H&R Sport Springs have been engineered to deliver improved handling and a lowered ride height while maintaining superb ride quality. Manufactured and tested at our facility in Lennestadt, Germany, H&R Sport Springs are the ideal solution for the enthusiast who appreciates race-bred components designed for street use.
In addition, the H&R sport springs are also the ideal solution if you want to optimize the driving behavior of your car and achieve a sporty look while maintaining the standard driving comfort. H&R Shop has a wide range of sport springs from various car brands that are available from small to large car reductions.
H&R Lowering Springs Peugeot 308 SW/308 SW GT Petrol 2014- FA30-40/RA30-40mm
H&R Lowering Springs Peugeot 308 SW/308 SW GT Petrol 2014- FA30-40/RA30-40mmH&R Lowering Springs have been engineered to deliver improved handling and a lowered ride height while maintaining superb ride quality. Manufactured and tested in Germany, H&R Springs are the ideal solution for the enthusiast who appreciates race-bred components designed for street use.Sporty appearanceLowered center of gravityLinear or progressive spring designCompatible with OE and aftermarket shock absorbersImproved handling characteristicsDelivered with ABE or TÜV approvalEngineered, manufactured and tested in GermanyPowder coated for enhanced appearance and corrosion resistance:Peugeot 308 SW Type L only petrol 2014- Front axle 40mm/Rear axle 40mmPeugeot 308 SW GT Type L only petrol 2014- Front axle 30mm/Rear axle 30mm
H&R Lowering Springs Peugeot 308/308 GT Diesel 2013- FA30/RA30mm
H&R Lowering Springs Peugeot 308/308 GT Diesel 2013- FA30/RA30mmH&R Lowering Springs have been engineered to deliver improved handling and a lowered ride height while maintaining superb ride quality. Manufactured and tested in Germany, H&R Springs are the ideal solution for the enthusiast who appreciates race-bred components designed for street use.Sporty appearanceLowered center of gravityLinear or progressive spring designCompatible with OE and aftermarket shock absorbersImproved handling characteristicsDelivered with ABE or TÜV approvalEngineered, manufactured and tested in GermanyPowder coated for enhanced appearance and corrosion resistance:Peugeot 308 Type L only Diesel 2013- Front axle 30mm/Rear axle 30mmPeugeot 308 GT Type L only Diesel 2015- Front axle 35mm/Rear axle 35mmPeugeot 308 Type L including GT, only Diesel including Facelift 2017 2013- Front axle 30mm/Rear axle 30mm
H&R Lowering Springs Peugeot 308/308 GT Petrol 2013- FA30/RA30mm
H&R Lowering Springs Peugeot 308/308 GT Petrol 2013- FA30/RA30mmH&R Lowering Springs have been engineered to deliver improved handling and a lowered ride height while maintaining superb ride quality. Manufactured and tested in Germany, H&R Springs are the ideal solution for the enthusiast who appreciates race-bred components designed for street use.Sporty appearanceLowered center of gravityLinear or progressive spring designCompatible with OE and aftermarket shock absorbersImproved handling characteristicsDelivered with ABE or TÜV approvalEngineered, manufactured and tested in GermanyPowder coated for enhanced appearance and corrosion resistance:Peugeot 308 Type L only petrol 2013- Front axle 30mm/Rear axle 30mmPeugeot 308 GT Type L only petrol 2015- Front axle 35mm/Rear axle 35mmPeugeot 308 Type L including GT, only petrol, including Facelift 2017 2013- Front axle 30mm/Rear axle 30mm
H&R Lowering Springs Peugeot 308/CC from 1091kg FA-Load 2007- FA45-50/RA45-50mm
H&R Lowering Springs Peugeot 308/CC from 1091kg FA-Load 2007- FA45-50/RA45-50mmH&R Lowering Springs have been engineered to deliver improved handling and a lowered ride height while maintaining superb ride quality. Manufactured and tested in Germany, H&R Springs are the ideal solution for the enthusiast who appreciates race-bred components designed for street use.Sporty appearanceLowered center of gravityLinear or progressive spring designCompatible with OE and aftermarket shock absorbersImproved handling characteristicsDelivered with ABE or TÜV approvalEngineered, manufactured and tested in GermanyPowder coated for enhanced appearance and corrosion resistance:Peugeot 308 including CC Low version, from 1091kg Front axle load 2007- Front axle 45-50mm/Rear axle 45-50mm
H&R Lowering Springs Peugeot 308/CC up to 1090kg FA-Load 2007- FA45-50/RA45-50mm
H&R Lowering Springs Peugeot 308/CC up to 1090kg FA-Load 2007- FA45-50/RA45-50mmH&R Lowering Springs have been engineered to deliver improved handling and a lowered ride height while maintaining superb ride quality. Manufactured and tested in Germany, H&R Springs are the ideal solution for the enthusiast who appreciates race-bred components designed for street use.Sporty appearanceLowered center of gravityLinear or progressive spring designCompatible with OE and aftermarket shock absorbersImproved handling characteristicsDelivered with ABE or TÜV approvalEngineered, manufactured and tested in GermanyPowder coated for enhanced appearance and corrosion resistance:Peugeot 308 including CC Low version, up to 1090kg Front axle load 2007- Front axle 45-50mm/Rear axle 45-50mm
H&R Lowering Springs Peugeot 309 1986-1993 FA25mm
H&R Lowering Springs Peugeot 309 1986-1993 FA25mmH&R Lowering Springs have been engineered to deliver improved handling and a lowered ride height while maintaining superb ride quality. Manufactured and tested in Germany, H&R Springs are the ideal solution for the enthusiast who appreciates race-bred components designed for street use.Sporty appearanceLowered center of gravityLinear or progressive spring designCompatible with OE and aftermarket shock absorbersImproved handling characteristicsDelivered with ABE or TÜV approvalEngineered, manufactured and tested in GermanyPowder coated for enhanced appearance and corrosion resistance:Peugeot 309 Type 10A/10C/3A/3C 1986-1993 Front axle 25mm/Rear axle Torsion axle
H&R Lowering Springs Peugeot 406 Break/Combi 1.6-3.0L 1997-2006 FA35/RA35mm
H&R Lowering Springs Peugeot 406 Break/Combi 1.6-3.0L 1997-2006 FA35/RA35mmH&R Lowering Springs have been engineered to deliver improved handling and a lowered ride height while maintaining superb ride quality. Manufactured and tested in Germany, H&R Springs are the ideal solution for the enthusiast who appreciates race-bred components designed for street use.Sporty appearanceLowered center of gravityLinear or progressive spring designCompatible with OE and aftermarket shock absorbersImproved handling characteristicsDelivered with ABE or TÜV approvalEngineered, manufactured and tested in GermanyPowder coated for enhanced appearance and corrosion resistance:Peugeot 406 Break/Combi 1.6-3.0L (including Diesel) 1997-2006 Front axle 35mm/Rear axle 35mm
H&R Lowering Springs Peugeot 406 Coupé up to 152kW 1997-2006 FA40/RA40mm
H&R Lowering Springs Peugeot 406 Coupé up to 152kW 1997-2006 FA40/RA40mmH&R Lowering Springs have been engineered to deliver improved handling and a lowered ride height while maintaining superb ride quality. Manufactured and tested in Germany, H&R Springs are the ideal solution for the enthusiast who appreciates race-bred components designed for street use.Sporty appearanceLowered center of gravityLinear or progressive spring designCompatible with OE and aftermarket shock absorbersImproved handling characteristicsDelivered with ABE or TÜV approvalEngineered, manufactured and tested in GermanyPowder coated for enhanced appearance and corrosion resistance:Peugeot 406 Coupé Type 8RFV/8XFZ/8RFR/8XFX/8RFN/84HX up to 152kW 1997-2006 Front axle 40mm/Rear axle 40mm
H&R Lowering Springs Peugeot 406 Sedan 1.6-3.0L 1995-2006 FA30/RA30mm
H&R Lowering Springs Peugeot 406 Sedan 1.6-3.0L 1995-2006 FA30/RA30mmH&R Lowering Springs have been engineered to deliver improved handling and a lowered ride height while maintaining superb ride quality. Manufactured and tested in Germany, H&R Springs are the ideal solution for the enthusiast who appreciates race-bred components designed for street use.Sporty appearanceLowered center of gravityLinear or progressive spring designCompatible with OE and aftermarket shock absorbersImproved handling characteristicsDelivered with ABE or TÜV approvalEngineered, manufactured and tested in GermanyPowder coated for enhanced appearance and corrosion resistance:Peugeot 406 Sedan Type 8LFX/8RLZ/8RHS, 1.6-3.0L (including Diesel) 1995-2006 Front axle 30mm/Rear axle 30mm
H&R Lowering Springs Peugeot 5008 from 1091kg FA-Load 2009- FA35/RA35mm
H&R Lowering Springs Peugeot 5008 from 1091kg FA-Load 2009- FA35/RA35mmH&R Lowering Springs have been engineered to deliver improved handling and a lowered ride height while maintaining superb ride quality. Manufactured and tested in Germany, H&R Springs are the ideal solution for the enthusiast who appreciates race-bred components designed for street use.Sporty appearanceLowered center of gravityLinear or progressive spring designCompatible with OE and aftermarket shock absorbersImproved handling characteristicsDelivered with ABE or TÜV approvalEngineered, manufactured and tested in GermanyPowder coated for enhanced appearance and corrosion resistance:Peugeot 5008, from 1091kg Front axle load, with ABE 2009- Front axle 35mm/Rear axle 35mm
H&R Lowering Springs Peugeot 508 Combi 2011- FA30/RA30mm
H&R Lowering Springs Peugeot 508 Combi 2011- FA30/RA30mmH&R Lowering Springs have been engineered to deliver improved handling and a lowered ride height while maintaining superb ride quality. Manufactured and tested in Germany, H&R Springs are the ideal solution for the enthusiast who appreciates race-bred components designed for street use.Sporty appearanceLowered center of gravityLinear or progressive spring designCompatible with OE and aftermarket shock absorbersImproved handling characteristicsDelivered with ABE or TÜV approvalEngineered, manufactured and tested in GermanyPowder coated for enhanced appearance and corrosion resistance:Peugeot 508 Combi Type 8, except GT, only for cars with McPherson Front axle, except front axle with double triangular control arm, with ABE 2011- Front axle 30mm/Rear axle 30mm
H&R Lowering Springs Peugeot 508 GT Sedan 2010- FA30mm/RA30mm
H&R Lowering Springs Peugeot 508 GT Sedan 2010- FA30mm/RA30mmH&R Lowering Springs have been engineered to deliver improved handling and a lowered ride height while maintaining superb ride quality. Manufactured and tested in Germany, H&R Springs are the ideal solution for the enthusiast who appreciates race-bred components designed for street use.Sporty appearanceLowered center of gravityLinear or progressive spring designCompatible with OE and aftermarket shock absorbersImproved handling characteristicsDelivered with ABE or TÜV approvalEngineered, manufactured and tested in GermanyPowder coated for enhanced appearance and corrosion resistance:Peugeot 508 GT Sedan Type 8, only for cars with multilink front axle, not for mcPherson front axle, with ABE 2010- Front axle 30mm/Rear axle 30mm
H&R Lowering Springs Peugeot 508 Sedan 2010- FA30/RA30mm
H&R Lowering Springs Peugeot 508 Sedan 2010- FA30/RA30mmH&R Lowering Springs have been engineered to deliver improved handling and a lowered ride height while maintaining superb ride quality. Manufactured and tested in Germany, H&R Springs are the ideal solution for the enthusiast who appreciates race-bred components designed for street use.Sporty appearanceLowered center of gravityLinear or progressive spring designCompatible with OE and aftermarket shock absorbersImproved handling characteristicsDelivered with ABE or TÜV approvalEngineered, manufactured and tested in GermanyPowder coated for enhanced appearance and corrosion resistance:Peugeot 508 Sedan Type 8, except GT, only for cars with McPherson Front axle, except front axle with double triangular control arm, with ABE 2010- Front axle 30mm/Rear axle 30mm
H&R Lowering Springs Peugeot 607 2000- FA35/RA35mm
H&R Lowering Springs Peugeot 607 2000- FA35/RA35mmH&R Lowering Springs have been engineered to deliver improved handling and a lowered ride height while maintaining superb ride quality. Manufactured and tested in Germany, H&R Springs are the ideal solution for the enthusiast who appreciates race-bred components designed for street use.Sporty appearanceLowered center of gravityLinear or progressive spring designCompatible with OE and aftermarket shock absorbersImproved handling characteristicsDelivered with ABE or TÜV approvalEngineered, manufactured and tested in GermanyPowder coated for enhanced appearance and corrosion resistance:Peugeot 607 Type 9 2000- Front axle 35mm/Rear axle 35mm
H&R Lowering Springs Peugeot e208 (U) & Opel Corsa-e (U) 2019- - FA35/RA35mm
H&R Lowering Springs Peugeot e208 (U) & Opel Corsa-e (U) 2019- - FA35/RA35mmH&R Lowering Springs have been engineered to deliver improved handling and a lowered ride height while maintaining superb ride quality. Manufactured and tested in Germany, H&R Springs are the ideal solution for the enthusiast who appreciates race-bred components designed for street use.Sporty appearanceLowered center of gravityLinear or progressive spring designCompatible with OE and aftermarket shock absorbersImproved handling characteristicsDelivered with ABE or TÜV approvalEngineered, manufactured and tested in GermanyPowder coated for enhanced appearance and corrosion resistance:Opel Corsa-e Type U 2019-, incl. GS-Line, Front axle 35mm / Rear axle 35mmPeugeot e-208 Type U 2019-, incl. GT-Line, Front axle 35mm / Rear axle 35mm
H&R Lowering Springs Peugeot RCZ 2010- FA20mm/RA20mm
H&R Lowering Springs Peugeot RCZ 2010- FA20mm/RA20mmH&R Lowering Springs have been engineered to deliver improved handling and a lowered ride height while maintaining superb ride quality. Manufactured and tested in Germany, H&R Springs are the ideal solution for the enthusiast who appreciates race-bred components designed for street use.Sporty appearanceLowered center of gravityLinear or progressive spring designCompatible with OE and aftermarket shock absorbersImproved handling characteristicsDelivered with ABE or TÜV approvalEngineered, manufactured and tested in GermanyPowder coated for enhanced appearance and corrosion resistance:Peugeot RCZ Type 4J 2010- Front axle 20mm/Rear axle 20mm
H&R Lowering Springs Porsche 911 (992) 2019- Targa 4/4S FA30/RA25mm & Carrera GTS/4 GTS (Cabrio/Coupé) FA25/RA15mm
H&R Lowering Springs Porsche 911 (992) 2019- Targa 4/4S FA30/RA25mm & Carrera GTS/4 GTS (Cabrio/Coupé) FA25/RA15mmH&R Lowering Springs have been engineered to deliver improved handling and a lowered ride height while maintaining superb ride quality. Manufactured and tested in Germany, H&R Springs are the ideal solution for the enthusiast who appreciates race-bred components designed for street use. Sporty appearanceLowered center of gravityLinear or progressive spring designCompatible with OE and aftermarket shock absorbersImproved handling characteristicsDelivered with ABE or TÜV approvalEngineered, manufactured and tested in GermanyPowder coated for enhanced appearance and corrosion resistance :Porsche 911 (992) 2019-, Targa 4 (2WD) & Targa 4S (4WD), only with PASM suspension (1BH), incl. front lift system, Front axle 30mm / Rear axle 25mmPorsche 911 (992) 2019-, Cabrio/Coupe, Carrera GTS (2WD) & Carrera 4 GTS (4WD), only with PASM suspension (1BH), incl. front lift system, Front axle 25mm / Rear axle 15mm
H&R Lowering Springs Porsche 911 (992) Carrera 4S Convertible/Coupe 2/4WD 2019- - FA30/RA25mm
H&R Lowering Springs Porsche 911 (992) Carrera 4S Convertible/Coupe 2/4WD 2019- - FA30/RA25mmH&R Lowering Springs have been engineered to deliver improved handling and a lowered ride height while maintaining superb ride quality. Manufactured and tested in Germany, H&R Springs are the ideal solution for the enthusiast who appreciates race-bred components designed for street use.Sporty appearanceLowered center of gravityLinear or progressive spring designCompatible with OE and aftermarket shock absorbersImproved handling characteristicsDelivered with ABE or TÜV approvalEngineered, manufactured and tested in GermanyPowder coated for enhanced appearance and corrosion resistance:Porsche 911 (992) Carrera 4S Convertible/Coupe 2/4WD, only with PASM suspension, 2019- - Front axle 30mm / Rear axle 25mm
H&R Lowering Springs Porsche 911 (992) Turbo/Turbo S 2020- FA20/RA20mm
H&R Lowering Springs Porsche 911 (992) Turbo/Turbo S 2020- FA20/RA20mmH&R Lowering Springs have been engineered to deliver improved handling and a lowered ride height while maintaining superb ride quality. Manufactured and tested in Germany, H&R Springs are the ideal solution for the enthusiast who appreciates race-bred components designed for street use.Sporty appearanceLowered center of gravityLinear or progressive spring designCompatible with OE and aftermarket shock absorbersImproved handling characteristicsDelivered with ABE or TÜV approvalEngineered, manufactured and tested in GermanyPowder coated for enhanced appearance and corrosion resistance:Porsche 911 (992) Convertible/Coupe, Turbo/Turbo S 2020-, with ABE, only with front lift system, only with PASM sport suspension, Front axle 20mm/Rear axle 20mm
H&R Lowering Springs Porsche 911 (992) Turbo/Turbo S 2020- FA30/RA30mm
H&R Lowering Springs Porsche 911 (992) Turbo/Turbo S 2020- FA30/RA30mmH&R Lowering Springs have been engineered to deliver improved handling and a lowered ride height while maintaining superb ride quality. Manufactured and tested in Germany, H&R Springs are the ideal solution for the enthusiast who appreciates race-bred components designed for street use.Sporty appearanceLowered center of gravityLinear or progressive spring designCompatible with OE and aftermarket shock absorbersImproved handling characteristicsDelivered with ABE or TÜV approvalEngineered, manufactured and tested in GermanyPowder coated for enhanced appearance and corrosion resistance:Porsche 911 (992) Convertible/Coupe, Turbo/Turbo S 2020-, with ABE, only with front lift system, only with PASM standard suspension, Front axle 30mm/Rear axle 30mm
H&R Lowering Springs Porsche 911 1993-1998 FA30/RA30mm
H&R Lowering Springs Porsche 911 1993-1998 FA30/RA30mmH&R Lowering Springs have been engineered to deliver improved handling and a lowered ride height while maintaining superb ride quality. Manufactured and tested in Germany, H&R Springs are the ideal solution for the enthusiast who appreciates race-bred components designed for street use.Sporty appearanceLowered center of gravityLinear or progressive spring designCompatible with OE and aftermarket shock absorbersImproved handling characteristicsDelivered with ABE or TÜV approvalEngineered, manufactured and tested in GermanyPowder coated for enhanced appearance and corrosion resistance:Porsche 911 Type 993, Carrera, with ABE 1993-1998 Front axle 30mm/Rear axle 30mm
H&R Lowering Springs Porsche 911 2WD 2012- FA30/RA30mm
H&R Lowering Springs Porsche 911 2WD 2012- FA30/RA30mmH&R Lowering Springs have been engineered to deliver improved handling and a lowered ride height while maintaining superb ride quality. Manufactured and tested in Germany, H&R Springs are the ideal solution for the enthusiast who appreciates race-bred components designed for street use.Sporty appearanceLowered center of gravityLinear or progressive spring designCompatible with OE and aftermarket shock absorbersImproved handling characteristicsDelivered with ABE or TÜV approvalEngineered, manufactured and tested in GermanyPowder coated for enhanced appearance and corrosion resistance:Porsche 911 2WD including Convertible Type 991, Carrera S, Coupé/Convertible, including PASM (-10mm), including PASM sport suspension (-20mm) 2012- Front axle 30mm/Rear axle 30mm
H&R Lowering Springs Porsche 911 C2 (996) 2WD up to 254kW 1997- FA30mm/RA30mm
H&R Lowering Springs Porsche 911 C2 (996) 2WD up to 254kW 1997- FA30mm/RA30mmH&R Lowering Springs have been engineered to deliver improved handling and a lowered ride height while maintaining superb ride quality. Manufactured and tested in Germany, H&R Springs are the ideal solution for the enthusiast who appreciates race-bred components designed for street use.Sporty appearanceLowered center of gravityLinear or progressive spring designCompatible with OE and aftermarket shock absorbersImproved handling characteristicsDelivered with ABE or TÜV approvalEngineered, manufactured and tested in GermanyPowder coated for enhanced appearance and corrosion resistance:Porsche 911 C2 (996) Carrera 2, 2WD Convertible/Targa up to 254kW, with ABE 1997- Front axle 30mm/Rear axle 30mm
H&R Lowering Springs Porsche 911 C2 2WD 1997- FA30/RA30mm
H&R Lowering Springs Porsche 911 C2 2WD 1997- FA30/RA30mmH&R Lowering Springs have been engineered to deliver improved handling and a lowered ride height while maintaining superb ride quality. Manufactured and tested in Germany, H&R Springs are the ideal solution for the enthusiast who appreciates race-bred components designed for street use.Sporty appearanceLowered center of gravityLinear or progressive spring designCompatible with OE and aftermarket shock absorbersImproved handling characteristicsDelivered with ABE or TÜV approvalEngineered, manufactured and tested in GermanyPowder coated for enhanced appearance and corrosion resistance:Porsche 911 C2 Type 996, Carrera 2, 2WD, Coupé up to 254kW, with ABE 1997- Front axle 30mm/Rear axle 30mm
H&R Lowering Springs Porsche 911 C2 2WD 2004- FA15/RA15mm
H&R Lowering Springs Porsche 911 C2 2WD 2004- FA15/RA15mmH&R Lowering Springs have been engineered to deliver improved handling and a lowered ride height while maintaining superb ride quality. Manufactured and tested in Germany, H&R Springs are the ideal solution for the enthusiast who appreciates race-bred components designed for street use.Sporty appearanceLowered center of gravityLinear or progressive spring designCompatible with OE and aftermarket shock absorbersImproved handling characteristicsDelivered with ABE or TÜV approvalEngineered, manufactured and tested in GermanyPowder coated for enhanced appearance and corrosion resistance:Porsche 911 C2 2WD Type 997 Carrera including Carrera S, with sport suspension, without PASM 2004- Front axle 15mm/Rear axle 15mmPorsche 911 C2 2WD Type 997 Carrera including Carrera S, Facelift, with OE sport suspension (-20mm) 2008- Front axle 15mm/Rear axle 15mm
H&R Lowering Springs Porsche 911 C2 2WD 2004- FA30/RA30mm
H&R Lowering Springs Porsche 911 C2 2WD 2004- FA30/RA30mmH&R Lowering Springs have been engineered to deliver improved handling and a lowered ride height while maintaining superb ride quality. Manufactured and tested in Germany, H&R Springs are the ideal solution for the enthusiast who appreciates race-bred components designed for street use.Sporty appearanceLowered center of gravityLinear or progressive spring designCompatible with OE and aftermarket shock absorbersImproved handling characteristicsDelivered with ABE or TÜV approvalEngineered, manufactured and tested in GermanyPowder coated for enhanced appearance and corrosion resistance:Porsche 911 C2 2WD including Convertible, including GT Type 997 Carrera including Carrera S, also with PASM, except cars with sport suspension, with ABE 2004- Front axle 30mm/Rear axle 30mm
H&R Lowering Springs Porsche 911 C2/4 1989-1993 FA40/RA40mm
H&R Lowering Springs Porsche 911 C2/4 1989-1993 FA40/RA40mmH&R Lowering Springs have been engineered to deliver improved handling and a lowered ride height while maintaining superb ride quality. Manufactured and tested in Germany, H&R Springs are the ideal solution for the enthusiast who appreciates race-bred components designed for street use.Sporty appearanceLowered center of gravityLinear or progressive spring designCompatible with OE and aftermarket shock absorbersImproved handling characteristicsDelivered with ABE or TÜV approvalEngineered, manufactured and tested in GermanyPowder coated for enhanced appearance and corrosion resistance:Porsche 911 C2/4 Type 964, including Convertible 1989-1993 Front axle 40mm/Rear axle 40mm
H&R Lowering Springs Porsche 911 C2/4 1993-1998 FA30/RA30mm
H&R Lowering Springs Porsche 911 C2/4 1993-1998 FA30/RA30mmH&R Lowering Springs have been engineered to deliver improved handling and a lowered ride height while maintaining superb ride quality. Manufactured and tested in Germany, H&R Springs are the ideal solution for the enthusiast who appreciates race-bred components designed for street use.Sporty appearanceLowered center of gravityLinear or progressive spring designCompatible with OE and aftermarket shock absorbersImproved handling characteristicsDelivered with ABE or TÜV approvalEngineered, manufactured and tested in GermanyPowder coated for enhanced appearance and corrosion resistance:Porsche 911 C2/4 Type 993 Carrera 2/2S, Carrera 4/4S, Targa, Convertible 1993-1998 Front axle 30mm/Rear axle 30mm
H&R Lowering Springs Porsche 911 C4 4WD Convertible/Targa/GTS 2005- FA20-25/RA20-25mm
H&R Lowering Springs Porsche 911 C4 4WD Convertible/Targa/GTS 2005- FA20-25/RA20-25mmH&R Lowering Springs have been engineered to deliver improved handling and a lowered ride height while maintaining superb ride quality. Manufactured and tested in Germany, H&R Springs are the ideal solution for the enthusiast who appreciates race-bred components designed for street use.Sporty appearanceLowered center of gravityLinear or progressive spring designCompatible with OE and aftermarket shock absorbersImproved handling characteristicsDelivered with ABE or TÜV approvalEngineered, manufactured and tested in GermanyPowder coated for enhanced appearance and corrosion resistance:Porsche 911 C4 4WD including Convertible/Targa including GTS Type 997, Carrera 4 including Carrera 4S, Targa, also with PASM, except cars with sport suspension, with ABE 2005- Front axle 20-25mm/Rear axle 20-25mm
H&R Lowering Springs Porsche 911 C4 4WD Coupé 1998- FA25/RA25mm
H&R Lowering Springs Porsche 911 C4 4WD Coupé 1998- FA25/RA25mmH&R Lowering Springs have been engineered to deliver improved handling and a lowered ride height while maintaining superb ride quality. Manufactured and tested in Germany, H&R Springs are the ideal solution for the enthusiast who appreciates race-bred components designed for street use.Sporty appearanceLowered center of gravityLinear or progressive spring designCompatible with OE and aftermarket shock absorbersImproved handling characteristicsDelivered with ABE or TÜV approvalEngineered, manufactured and tested in GermanyPowder coated for enhanced appearance and corrosion resistance:Porsche 911 C4 Type 996, Carrera 4, Carrera 4S, 4WD, Coupé, with ABE 1998- Front axle 25mm/Rear axle 25mm
H&R Lowering Springs Porsche 911 C4 4WD/911 Turbo 1998- FA25/RA25mm
H&R Lowering Springs Porsche 911 C4 4WD/911 Turbo 1998- FA25/RA25mmH&R Lowering Springs have been engineered to deliver improved handling and a lowered ride height while maintaining superb ride quality. Manufactured and tested in Germany, H&R Springs are the ideal solution for the enthusiast who appreciates race-bred components designed for street use.Sporty appearanceLowered center of gravityLinear or progressive spring designCompatible with OE and aftermarket shock absorbersImproved handling characteristicsDelivered with ABE or TÜV approvalEngineered, manufactured and tested in GermanyPowder coated for enhanced appearance and corrosion resistance:Porsche 911 C4 Type 996, Carrera 4, Carrera 4S, 4WD, Convertible, with ABE 1998- Front axle 25mm/Rear axle 25mmPorsche 911 Turbo Type 996 Turbo, Convertible, 911 Carrera 4S 2000- Front axle 25mm/Rear axle 25mm
H&R Lowering Springs Porsche 911 Turbo 1993-2000 FA25/RA25mm
H&R Lowering Springs Porsche 911 Turbo 1993-2000 FA25/RA25mmH&R Lowering Springs have been engineered to deliver improved handling and a lowered ride height while maintaining superb ride quality. Manufactured and tested in Germany, H&R Springs are the ideal solution for the enthusiast who appreciates race-bred components designed for street use.Sporty appearanceLowered center of gravityLinear or progressive spring designCompatible with OE and aftermarket shock absorbersImproved handling characteristicsDelivered with ABE or TÜV approvalEngineered, manufactured and tested in GermanyPowder coated for enhanced appearance and corrosion resistance:Porsche 911 Turbo Type 993 1993-2000 Front axle 25mm/Rear axle 25mm
H&R Lowering Springs Porsche 911 Turbo 2006- FA20/RA20mm
H&R Lowering Springs Porsche 911 Turbo 2006- FA20/RA20mmH&R Lowering Springs have been engineered to deliver improved handling and a lowered ride height while maintaining superb ride quality. Manufactured and tested in Germany, H&R Springs are the ideal solution for the enthusiast who appreciates race-bred components designed for street use.Sporty appearanceLowered center of gravityLinear or progressive spring designCompatible with OE and aftermarket shock absorbersImproved handling characteristicsDelivered with ABE or TÜV approvalEngineered, manufactured and tested in GermanyPowder coated for enhanced appearance and corrosion resistance:Porsche 911 Turbo including Turbo Convertible Type 997, including Turbo S, including Facelift (500 PS Version) 2006- Front axle 20mm/Rear axle 20mm
H&R Lowering Springs Porsche 911 Turbo 4WD 2013- FA30/RA30mm
H&R Lowering Springs Porsche 911 Turbo 4WD 2013- FA30/RA30mmH&R Lowering Springs have been engineered to deliver improved handling and a lowered ride height while maintaining superb ride quality. Manufactured and tested in Germany, H&R Springs are the ideal solution for the enthusiast who appreciates race-bred components designed for street use.Sporty appearanceLowered center of gravityLinear or progressive spring designCompatible with OE and aftermarket shock absorbersImproved handling characteristicsDelivered with ABE or TÜV approvalEngineered, manufactured and tested in GermanyPowder coated for enhanced appearance and corrosion resistance:Porsche 911 (991) Turbo Type 991, 4WD, only Turbo/Turbo S 2013- Front axle 30mm/Rear axle 30mm
H&R Lowering Springs Porsche 911/911 GTS/GTS Convertible 2/4WD 2013- FA20-25/RA20-25mm
H&R Lowering Springs Porsche 911/911 GTS/GTS Convertible 2/4WD 2013- FA20-25/RA20-25mmH&R Lowering Springs have been engineered to deliver improved handling and a lowered ride height while maintaining superb ride quality. Manufactured and tested in Germany, H&R Springs are the ideal solution for the enthusiast who appreciates race-bred components designed for street use.Sporty appearanceLowered center of gravityLinear or progressive spring designCompatible with OE and aftermarket shock absorbersImproved handling characteristicsDelivered with ABE or TÜV approvalEngineered, manufactured and tested in GermanyPowder coated for enhanced appearance and corrosion resistance:Porsche 911 4WD including Convertible/Targa Type 991, Carrera S, Coupé/Targa, Convertible, including PASM (-10mm), including PASM sport suspension (-20mm) 2013- Front axle 25mm/Rear axle 25mmPorsche 911 GTS + GTS Convertible 2WD Type 991 2/4WD 2014- Front axle 20-25mm/Rear axle 20-25mm
H&R Lowering Springs Porsche 964 Turbo 1991-1993 FA35/RA35mm
H&R Lowering Springs Porsche 964 Turbo 1991-1993 FA35/RA35mmH&R Lowering Springs have been engineered to deliver improved handling and a lowered ride height while maintaining superb ride quality. Manufactured and tested in Germany, H&R Springs are the ideal solution for the enthusiast who appreciates race-bred components designed for street use.Sporty appearanceLowered center of gravityLinear or progressive spring designCompatible with OE and aftermarket shock absorbersImproved handling characteristicsDelivered with ABE or TÜV approvalEngineered, manufactured and tested in GermanyPowder coated for enhanced appearance and corrosion resistance:Porsche 964 Turbo Type 965 1991-1993 Front axle 35mm/Rear axle 35mm