H&R DRM-System Wheelspacers 30mm 5x108 - Hub 63,3mm - Bolt size M14x1,5 - Ford/Jaguar/Landrover - Black
H&R DRM-System Wheel spacers:- 30mm per spacer - 60mm per axle - Bolt pattern 5x108 - Hub 63,3mm - Bolt size M14x1,5 - Ford/Jaguar/Landrover - Black H&R TRAK+ Wheels Spacers improve the look as well as the handling of your car with wheel spacers. TRAK+TM wheel spacers are compatible with both the stock and aftermarket wheels. Product benefits: High strength, lightweight aluminum/magnesium alloy Precision CNC machined Hard anodized for greater surface hardness and corrosion resistance Fit either stock or aftermarket wheels Compatible with OEM and aftermarket suspension systems Available for a wide range of automobiles Delivered with approval Produced in Germany The wheel spacer should be attached to the axial hub using the fastening nuts provided. The wheels should then be fitted using the existing wheel nuts provided with the wheels. Using steel wheel rims in combination with DRM system is generally not possible. All fixing-accessories are included! Remark: Not usable with steel rims
H&R DRS-MZ-System Wheelspacers 10mm 4x108 - Hub 63,3mm - Bolt size M12x1,5 - Ford - Black
H&R DRS-MZ-System Wheel spacers:- 10mm per spacer - 20mm per axle - Bolt pattern 4x108 - Hub 63,3mm - Bolt size M12x1,5 - Ford - Black H&R TRAK+ Wheels Spacers improve the look as well as the handling of your car with wheel spacers. TRAK+TM wheel spacers are compatible with both the stock and aftermarket wheels. Product benefits: High strength, lightweight aluminum/magnesium alloy Precision CNC machined Hard anodized for greater surface hardness and corrosion resistance Fit either stock or aftermarket wheels Compatible with OEM and aftermarket suspension systems Available for a wide range of automobiles Delivered with approval The ABE sets include mounting material and wheel locks Produced in Germany The fitting of the DRS-MZ-System requires the exchange of the existing knurl nuts with the appropriate longer H&R shank nuts. The longer H&R nuts are supplied. All fixing-accessories are included! Remark: Not usable with steel rims Only installation on the rear axle (ask for more detailed info)
H&R DRS-MZ-System Wheelspacers 10mm 5x108 - Hub 63,3mm - Bolt size M12x1,5 - Ford
H&R DRS-MZ-System Wheel spacers:- 10mm per spacer - 20mm per axle - Bolt pattern 5x108 - Hub 63,3mm - Bolt size M12x1,5 - Ford H&R TRAK+ Wheels Spacers improve the look as well as the handling of your car with wheel spacers. TRAK+TM wheel spacers are compatible with both the stock and aftermarket wheels. Product benefits: High strength, lightweight aluminum/magnesium alloy Precision CNC machined Hard anodized for greater surface hardness and corrosion resistance Fit either stock or aftermarket wheels Compatible with OEM and aftermarket suspension systems Available for a wide range of automobiles Delivered with approval The ABE sets include mounting material and wheel locks Produced in Germany The fitting of the DRS-MZ-System requires the exchange of the existing knurl nuts with the appropriate longer H&R shank nuts. The longer H&R nuts are supplied. All fixing-accessories are included! Remark: Not usable with steel rims
H&R DRS-MZ-System Wheelspacers 10mm 5x108 - Hub 63,3mm - Bolt size M12x1,5 - Ford - Black
H&R DRS-MZ-System Wheel spacers:- 10mm per spacer - 20mm per axle - Bolt pattern 5x108 - Hub 63,3mm - Bolt size M12x1,5 - Ford - Black H&R TRAK+ Wheels Spacers improve the look as well as the handling of your car with wheel spacers. TRAK+TM wheel spacers are compatible with both the stock and aftermarket wheels. Product benefits: High strength, lightweight aluminum/magnesium alloy Precision CNC machined Hard anodized for greater surface hardness and corrosion resistance Fit either stock or aftermarket wheels Compatible with OEM and aftermarket suspension systems Available for a wide range of automobiles Delivered with approval The ABE sets include mounting material and wheel locks Produced in Germany The fitting of the DRS-MZ-System requires the exchange of the existing knurl nuts with the appropriate longer H&R shank nuts. The longer H&R nuts are supplied. All fixing-accessories are included! Remark: Not usable with steel rims
H&R DRS-MZ-System Wheelspacers 10mm 5x108 - Hub 63,3mm - Bolt size M14x1,5 - Jaguar/Range Rover/Ford
H&R DRS-MZ-System Wheel spacers:- 10mm per spacer - 20mm per axle - Bolt pattern 5x108 - Hub 63,3mm - Bolt size M14x1,5 - Jaguar/Range Rover/Ford H&R TRAK+ Wheels Spacers improve the look as well as the handling of your car with wheel spacers. TRAK+TM wheel spacers are compatible with both the stock and aftermarket wheels. Product benefits: High strength, lightweight aluminum/magnesium alloy Precision CNC machined Hard anodized for greater surface hardness and corrosion resistance Fit either stock or aftermarket wheels Compatible with OEM and aftermarket suspension systems Available for a wide range of automobiles Delivered with approval The ABE sets include mounting material and wheel locks Produced in Germany The fitting of the DRS-MZ-System requires the exchange of the existing knurl nuts with the appropriate longer H&R shank nuts. The longer H&R nuts are supplied. All fixing-accessories are included! Remark: Not usable with steel rims
H&R DRS-MZ-System Wheelspacers 10mm 5x108 - Hub 63,3mm - Bolt size M14x1,5 - Jaguar/Range Rover/Ford - Black
H&R DRS-MZ-System Wheel spacers:- 10mm per spacer - 20mm per axle - Bolt pattern 5x108 - Hub 63,3mm - Bolt size M14x1,5 - Jaguar/Range Rover/Ford - Black H&R TRAK+ Wheels Spacers improve the look as well as the handling of your car with wheel spacers. TRAK+TM wheel spacers are compatible with both the stock and aftermarket wheels. Product benefits: High strength, lightweight aluminum/magnesium alloy Precision CNC machined Hard anodized for greater surface hardness and corrosion resistance Fit either stock or aftermarket wheels Compatible with OEM and aftermarket suspension systems Available for a wide range of automobiles Delivered with approval The ABE sets include mounting material and wheel locks Produced in Germany The fitting of the DRS-MZ-System requires the exchange of the existing knurl nuts with the appropriate longer H&R shank nuts. The longer H&R nuts are supplied. All fixing-accessories are included! Remark: Not usable with steel rims
H&R DRS-MZ-System Wheelspacers 9mm 5x108 - Hub 63,3mm - Bolt size M12x1,5 - Ford
H&R DRS-MZ-System Wheel spacers:- 9mm per spacer - 18mm per axle - Bolt pattern 5x108 - Hub 63,3mm - Bolt size M12x1,5 - Ford H&R TRAK+ Wheels Spacers improve the look as well as the handling of your car with wheel spacers. TRAK+TM wheel spacers are compatible with both the stock and aftermarket wheels. Product benefits: High strength, lightweight aluminum/magnesium alloy Precision CNC machined Hard anodized for greater surface hardness and corrosion resistance Fit either stock or aftermarket wheels Compatible with OEM and aftermarket suspension systems Available for a wide range of automobiles Delivered with approval The ABE sets include mounting material and wheel locks Produced in Germany The fitting of the DRS-MZ-System requires the exchange of the existing knurl nuts with the appropriate longer H&R shank nuts. The longer H&R nuts are supplied. All fixing-accessories are included! Remark: Not usable with steel rims
H&R DRS-MZ-System Wheelspacers 9mm 5x108 - Hub 63,3mm - Bolt size M12x1,5 - Ford - Black
H&R DRS-MZ-System Wheel spacers:- 9mm per spacer - 18mm per axle - Bolt pattern 5x108 - Hub 63,3mm - Bolt size M12x1,5 - Ford - Black H&R TRAK+ Wheels Spacers improve the look as well as the handling of your car with wheel spacers. TRAK+TM wheel spacers are compatible with both the stock and aftermarket wheels. Product benefits: High strength, lightweight aluminum/magnesium alloy Precision CNC machined Hard anodized for greater surface hardness and corrosion resistance Fit either stock or aftermarket wheels Compatible with OEM and aftermarket suspension systems Available for a wide range of automobiles Delivered with approval The ABE sets include mounting material and wheel locks Produced in Germany The fitting of the DRS-MZ-System requires the exchange of the existing knurl nuts with the appropriate longer H&R shank nuts. The longer H&R nuts are supplied. All fixing-accessories are included! Remark: Not usable with steel rims
H&R DRS-System Wheelspacers 10mm 5x108 - Hub 63,3mm - Bolt size M12x1,5 - Ford
H&R DRS-System Wheel spacers:- 10mm per spacer - 20mm per axle - Bolt pattern 5x108 - Hub 63,3mm - Bolt size M12x1,5 - Ford H&R TRAK+ Wheels Spacers improve the look as well as the handling of your car with wheel spacers. TRAK+TM wheel spacers are compatible with both the stock and aftermarket wheels. Product benefits: High strength, lightweight aluminum/magnesium alloy Precision CNC machined Hard anodized for greater surface hardness and corrosion resistance Fit either stock or aftermarket wheels Compatible with OEM and aftermarket suspension systems Available for a wide range of automobiles Delivered with approval The ABE sets include mounting material and wheel locks Produced in Germany The fitting of the DRS-System requires the exchange in the wheel flanges or the brake drums, of the existing knurl bolts with the appropriate longer H&R knurl bolts. The longer H&R knurl bolts are supplied. The wheels should then be fitted using the existing wheel nuts provided with the wheels. All fixing-accessories are included!
H&R DRS-System Wheelspacers 10mm 5x108 - Hub 63,3mm - Bolt size M12x1,5 - Ford - Black
H&R DRS-System Wheel spacers:- 10mm per spacer - 20mm per axle - Bolt pattern 5x108 - Hub 63,3mm - Bolt size M12x1,5 - Ford - Black H&R TRAK+ Wheels Spacers improve the look as well as the handling of your car with wheel spacers. TRAK+TM wheel spacers are compatible with both the stock and aftermarket wheels. Product benefits: High strength, lightweight aluminum/magnesium alloy Precision CNC machined Hard anodized for greater surface hardness and corrosion resistance Fit either stock or aftermarket wheels Compatible with OEM and aftermarket suspension systems Available for a wide range of automobiles Delivered with approval The ABE sets include mounting material and wheel locks Produced in Germany The fitting of the DRS-System requires the exchange in the wheel flanges or the brake drums, of the existing knurl bolts with the appropriate longer H&R knurl bolts. The longer H&R knurl bolts are supplied. The wheels should then be fitted using the existing wheel nuts provided with the wheels. All fixing-accessories are included!
H&R DRS-System Wheelspacers 18mm 5x108 - Hub 63,3mm - Bolt size M12x1,5 - Ford/Jaguar
H&R DRS-System Wheel spacers:- 18mm per spacer - 36mm per axle - Bolt pattern 5x108 - Hub 63,3mm - Bolt size M12x1,5 - Ford/Jaguar H&R TRAK+ Wheels Spacers improve the look as well as the handling of your car with wheel spacers. TRAK+TM wheel spacers are compatible with both the stock and aftermarket wheels. Product benefits: High strength, lightweight aluminum/magnesium alloy Precision CNC machined Hard anodized for greater surface hardness and corrosion resistance Fit either stock or aftermarket wheels Compatible with OEM and aftermarket suspension systems Available for a wide range of automobiles Delivered with approval The ABE sets include mounting material and wheel locks Produced in Germany The fitting of the DRS-System requires the exchange in the wheel flanges or the brake drums, of the existing knurl bolts with the appropriate longer H&R knurl bolts. The longer H&R knurl bolts are supplied. The wheels should then be fitted using the existing wheel nuts provided with the wheels. All fixing-accessories are included! Remark: Not usable with steel rims
H&R DRS-System Wheelspacers 18mm 5x108 - Hub 63,3mm - Bolt size M12x1,5 - Ford/Jaguar - Black
H&R DRS-System Wheel spacers:- 18mm per spacer - 36mm per axle - Bolt pattern 5x108 - Hub 63,3mm - Bolt size M12x1,5 - Ford/Jaguar - Black H&R TRAK+ Wheels Spacers improve the look as well as the handling of your car with wheel spacers. TRAK+TM wheel spacers are compatible with both the stock and aftermarket wheels. Product benefits: High strength, lightweight aluminum/magnesium alloy Precision CNC machined Hard anodized for greater surface hardness and corrosion resistance Fit either stock or aftermarket wheels Compatible with OEM and aftermarket suspension systems Available for a wide range of automobiles Delivered with approval The ABE sets include mounting material and wheel locks Produced in Germany The fitting of the DRS-System requires the exchange in the wheel flanges or the brake drums, of the existing knurl bolts with the appropriate longer H&R knurl bolts. The longer H&R knurl bolts are supplied. The wheels should then be fitted using the existing wheel nuts provided with the wheels. All fixing-accessories are included! Remark: Not usable with steel rims
H&R DRS-System Wheelspacers 20mm 5x108 - Hub 63,3mm - Bolt size M12x1,5 - Ford/Volvo
H&R DRS-System Wheel spacers:- 20mm per spacer - 40mm per axle - Bolt pattern 5x108 - Hub 63,3mm - Bolt size M12x1,5 - Ford/Volvo H&R TRAK+ Wheels Spacers improve the look as well as the handling of your car with wheel spacers. TRAK+TM wheel spacers are compatible with both the stock and aftermarket wheels. Product benefits: High strength, lightweight aluminum/magnesium alloy Precision CNC machined Hard anodized for greater surface hardness and corrosion resistance Fit either stock or aftermarket wheels Compatible with OEM and aftermarket suspension systems Available for a wide range of automobiles Delivered with approval The ABE sets include mounting material and wheel locks Produced in Germany The fitting of the DRS-System requires the exchange in the wheel flanges or the brake drums, of the existing knurl bolts with the appropriate longer H&R knurl bolts. The longer H&R knurl bolts are supplied. The wheels should then be fitted using the existing wheel nuts provided with the wheels. All fixing-accessories are included!
H&R DRS-System Wheelspacers 20mm 5x108 - Hub 63,3mm - Bolt size M12x1,5 - Ford/Volvo - Black
H&R DRS-System Wheel spacers:- 20mm per spacer - 40mm per axle - Bolt pattern 5x108 - Hub 63,3mm - Bolt size M12x1,5 - Ford/Volvo - Black H&R TRAK+ Wheels Spacers improve the look as well as the handling of your car with wheel spacers. TRAK+TM wheel spacers are compatible with both the stock and aftermarket wheels. Product benefits: High strength, lightweight aluminum/magnesium alloy Precision CNC machined Hard anodized for greater surface hardness and corrosion resistance Fit either stock or aftermarket wheels Compatible with OEM and aftermarket suspension systems Available for a wide range of automobiles Delivered with approval The ABE sets include mounting material and wheel locks Produced in Germany The fitting of the DRS-System requires the exchange in the wheel flanges or the brake drums, of the existing knurl bolts with the appropriate longer H&R knurl bolts. The longer H&R knurl bolts are supplied. The wheels should then be fitted using the existing wheel nuts provided with the wheels. All fixing-accessories are included!
H&R DRS-System Wheelspacers 5mm 5x108 - Hub 63,3mm - Bolt size M12x1,5 - Ford
H&R DRS-System Wheel spacers:- 5mm per spacer - 10mm per axle - Bolt pattern 5x108 - Hub 63,3mm - Bolt size M12x1,5 - Ford H&R TRAK+ Wheels Spacers improve the look as well as the handling of your car with wheel spacers. TRAK+TM wheel spacers are compatible with both the stock and aftermarket wheels. Product benefits: High strength, lightweight aluminum/magnesium alloy Precision CNC machined Hard anodized for greater surface hardness and corrosion resistance Fit either stock or aftermarket wheels Compatible with OEM and aftermarket suspension systems Available for a wide range of automobiles Delivered with approval The ABE sets include mounting material and wheel locks Produced in Germany The fitting of the DRS-System requires the exchange in the wheel flanges or the brake drums, of the existing knurl bolts with the appropriate longer H&R knurl bolts. The longer H&R knurl bolts are supplied. The wheels should then be fitted using the existing wheel nuts provided with the wheels. All fixing-accessories are included!
H&R DRS-System Wheelspacers 5mm 5x108 - Hub 63,3mm - Bolt size M12x1,5 - Ford - Black
H&R DRS-System Wheel spacers:- 5mm per spacer - 10mm per axle - Bolt pattern 5x108 - Hub 63,3mm - Bolt size M12x1,5 - Ford - Black H&R TRAK+ Wheels Spacers improve the look as well as the handling of your car with wheel spacers. TRAK+TM wheel spacers are compatible with both the stock and aftermarket wheels. Product benefits: High strength, lightweight aluminum/magnesium alloy Precision CNC machined Hard anodized for greater surface hardness and corrosion resistance Fit either stock or aftermarket wheels Compatible with OEM and aftermarket suspension systems Available for a wide range of automobiles Delivered with approval The ABE sets include mounting material and wheel locks Produced in Germany The fitting of the DRS-System requires the exchange in the wheel flanges or the brake drums, of the existing knurl bolts with the appropriate longer H&R knurl bolts. The longer H&R knurl bolts are supplied. The wheels should then be fitted using the existing wheel nuts provided with the wheels. All fixing-accessories are included!
H&R Wheel Spacers 10mm 5x108 - Hub 60,1mm - Bolt size M12x1,5 - Renault
H&R DR-System Wheel spacers:- 10mm per spacer - 20mm per axle - Bolt pattern 5x108 - Hub 60,1mm - Bolt size M12x1,5 - Renault H&R TRAK+ Wheels Spacers improve the look as well as the handling of your car with wheel spacers. TRAK+TM wheel spacers are compatible with both the stock and aftermarket wheels. Product benefits: High strength, lightweight aluminum/magnesium alloy Precision CNC machined Hard anodized for greater surface hardness and corrosion resistance Fit either stock or aftermarket wheels Compatible with OEM and aftermarket suspension systems Available for a wide range of automobiles Delivered with approval The ABE sets include mounting material and wheel locks Produced in Germany The wheel spacer should be fitted between the wheel and the axial hub using longer wheel bolts (please order separately). When ordering the longer bolts please state which cone type you require and the required extra length. All screws for the DR Systems have to be ordered separately.
H&R Wheel Spacers 10mm 5x98 - Hub 58,0mm - Bolt size M12/14x1,25/1,5
H&R DR-System Wheel spacers:- 10mm per spacer - 20mm per axle - Bolt pattern 5x98 - Hub 58,0mm - Bolt size M12/14x1,25/1,5 H&R TRAK+ Wheels Spacers improve the look as well as the handling of your car with wheel spacers. TRAK+TM wheel spacers are compatible with both the stock and aftermarket wheels. Product benefits: High strength, lightweight aluminum/magnesium alloy Precision CNC machined Hard anodized for greater surface hardness and corrosion resistance Fit either stock or aftermarket wheels Compatible with OEM and aftermarket suspension systems Available for a wide range of automobiles Delivered with approval The ABE sets include mounting material and wheel locks Produced in Germany The wheel spacer should be fitted between the wheel and the axial hub using longer bolt snot supplied (please order separately). When ordering the longer bolts please state which cone type you require and the required extra length. All screws for the DR Systems have to be ordered separately. Bolt size M12x1,25: Alfa Romeo 147 & 156 & Spider/Coupé/GTV Type 916 Alfa Romeo 164 6-Cylinder Alfa Romeo 166 Lancia Kappa Bolt size M14x1,5 Citroën Evasion 22 & C8 Fiat Ulysse 220/179 Lancia Phedra 179 Peugeot 806/807
H&R Wheel Spacers 15mm 5x108 - Hub 60,1mm - Bolt size M12/M14x1,5 - Renault
H&R DR-System Wheel spacers:- 15mm per spacer - 30mm per axle - Bolt pattern 5x108 - Hub 60,1mm - Bolt size M12/M14x1,5 - Renault H&R TRAK+ Wheels Spacers improve the look as well as the handling of your car with wheel spacers. TRAK+TM wheel spacers are compatible with both the stock and aftermarket wheels. Product benefits: High strength, lightweight aluminum/magnesium alloy Precision CNC machined Hard anodized for greater surface hardness and corrosion resistance Fit either stock or aftermarket wheels Compatible with OEM and aftermarket suspension systems Available for a wide range of automobiles Delivered with approval The ABE sets include mounting material and wheel locks Produced in Germany The wheel spacer should be fitted between the wheel and the axial hub using longer wheel bolts (please order separately). When ordering the longer bolts please state which cone type you require and the required extra length. All screws for the DR Systems have to be ordered separately. Bolt size M12x1,5: Renault Clio B (5-hole-wheels) Renault Scenic JA (5-hole-wheels) Renault Laguna Type G Bolt size M14x1,5: Renault RX4 Safrane (5-hole-wheels) Renault Laguna Type B/K 56 (5-hole-wheels) Renault Espace 6-Cylinder (5-hole-wheels)
H&R Wheel Spacers 15mm 5x108 - Hub 63,3mm - Bolt size M12x1,5 - Ford/Volvo
H&R DRS-System Wheel spacers:- 15mm per spacer - 30mm per axle - Bolt pattern 5x108 - Hub 63,3mm - Bolt size M12x1,5 - Ford/Volvo H&R TRAK+ Wheels Spacers improve the look as well as the handling of your car with wheel spacers. TRAK+TM wheel spacers are compatible with both the stock and aftermarket wheels. Product benefits: High strength, lightweight aluminum/magnesium alloy Precision CNC machined Hard anodized for greater surface hardness and corrosion resistance Fit either stock or aftermarket wheels Compatible with OEM and aftermarket suspension systems Available for a wide range of automobiles Delivered with approval The ABE sets include mounting material and wheel locks Produced in Germany The fitting of the DRS-System requires the exchange in the wheel flanges or the brake drums, of the existing knurl bolts with the appropriate longer H&R knurl bolts. The longer H&R knurl bolts are supplied. The wheels should then be fitted using the existing wheel nuts provided with the wheels. All fixing-accessories are included! Not applicable with steel rims: Ford Focus III Type DYB Ford Focus III ST Type DYB
H&R Wheel Spacers 15mm 5x108 - Hub 63,3mm - Bolt size M12x1,5 - Ford/Volvo - Black
H&R DRS-System Wheel spacers:- 15mm per spacer - 30mm per axle - Bolt pattern 5x108 - Hub 63,3mm - Bolt size M12x1,5 - Ford/Volvo - Black H&R TRAK+ Wheels Spacers improve the look as well as the handling of your car with wheel spacers. TRAK+TM wheel spacers are compatible with both the stock and aftermarket wheels. Product benefits: High strength, lightweight aluminum/magnesium alloy Precision CNC machined Hard anodized for greater surface hardness and corrosion resistance Fit either stock or aftermarket wheels Compatible with OEM and aftermarket suspension systems Available for a wide range of automobiles Delivered with approval The ABE sets include mounting material and wheel locks Produced in Germany The fitting of the DRS-System requires the exchange in the wheel flanges or the brake drums, of the existing knurl bolts with the appropriate longer H&R knurl bolts. The longer H&R knurl bolts are supplied. The wheels should then be fitted using the existing wheel nuts provided with the wheels. All fixing-accessories are included! Not applicable with steel rims: Ford Focus III Type DYB Ford Focus III ST Type DYB
H&R Wheel Spacers 15mm 5x108 - Hub 65mm - Bolt size M12x1,25 - Citroën/Opel/Peugeot/Volvo
H&R DR-System Wheel spacers:- 15mm per spacer - 30mm per axle - Bolt pattern 5x108 - Hub 65mm - Bolt size M12x1,25 - Citroën/Opel/Peugeot/Volvo H&R TRAK+ Wheels Spacers improve the look as well as the handling of your car with wheel spacers. TRAK+TM wheel spacers are compatible with both the stock and aftermarket wheels. Product benefits: High strength, lightweight aluminum/magnesium alloy Precision CNC machined Hard anodized for greater surface hardness and corrosion resistance Fit either stock or aftermarket wheels Compatible with OEM and aftermarket suspension systems Available for a wide range of automobiles Delivered with approval The ABE sets include mounting material and wheel locks Produced in Germany The wheel spacer should be fitted between the wheel and the axial hub using longer wheel bolts (please order separately). When ordering the longer bolts please state which cone type you require and the required extra length. All screws for the DR Systems have to be ordered separately. Not applicable with steel rims: Peugeot 308 Type L Bolt size M14x1,5: Volvo S60 Type R Volvo V70 Type S Volvo S80 Type T Bolt size M12x1,75: Volvo 850 (5-hole-wheels) Volvo S70/V70 Type L (5-hole-wheels) Volvo C70 Type N Volvo S90/V90
H&R Wheel Spacers 15mm 5x108 - Hub 67mm - Bolt size M14x1,5 - Ferrari/Maserati/Volvo
H&R DR-System Wheel spacers:- 15mm per spacer - 30mm per axle - Bolt pattern 5x108 - Hub 67mm - Bolt size M14x1,5 - Ferrari/Maserati/Volvo H&R TRAK+ Wheels Spacers improve the look as well as the handling of your car with wheel spacers. TRAK+TM wheel spacers are compatible with both the stock and aftermarket wheels. Product benefits: High strength, lightweight aluminum/magnesium alloy Precision CNC machined Hard anodized for greater surface hardness and corrosion resistance Fit either stock or aftermarket wheels Compatible with OEM and aftermarket suspension systems Available for a wide range of automobiles Delivered with approval The ABE sets include mounting material and wheel locks Produced in Germany The wheel spacer should be fitted between the wheel and the axial hub using longer wheel bolts (please order separately). When ordering the longer bolts please state which cone type you require and the required extra length. All screws for the DR Systems have to be ordered separately.
H&R Wheel Spacers 15mm 5x108 - Hub 67mm - Bolt size M14x1,5 - Ferrari/Maserati/Volvo - Black
H&R DR-System Wheel spacers:- 15mm per spacer - 30mm per axle - Bolt pattern 5x108 - Hub 67mm - Bolt size M14x1,5 - Ferrari/Maserati/Volvo - Black H&R TRAK+ Wheels Spacers improve the look as well as the handling of your car with wheel spacers. TRAK+TM wheel spacers are compatible with both the stock and aftermarket wheels. Product benefits: High strength, lightweight aluminum/magnesium alloy Precision CNC machined Hard anodized for greater surface hardness and corrosion resistance Fit either stock or aftermarket wheels Compatible with OEM and aftermarket suspension systems Available for a wide range of automobiles Delivered with approval The ABE sets include mounting material and wheel locks Produced in Germany The wheel spacer should be fitted between the wheel and the axial hub using longer wheel bolts (please order separately). When ordering the longer bolts please state which cone type you require and the required extra length. All screws for the DR Systems have to be ordered separately.
H&R Wheel Spacers 15mm 5x98/108 - Hub 58mm - Bolt size M12x1,25
H&R DR-System Wheel spacers:- 15mm per spacer - 30mm per axle - Bolt pattern 5x98/108 - Hub 58mm - Bolt size M12x1,25 H&R TRAK+ Wheels Spacers improve the look as well as the handling of your car with wheel spacers. TRAK+TM wheel spacers are compatible with both the stock and aftermarket wheels. Product benefits: High strength, lightweight aluminum/magnesium alloy Precision CNC machined Hard anodized for greater surface hardness and corrosion resistance Fit either stock or aftermarket wheels Compatible with OEM and aftermarket suspension systems Available for a wide range of automobiles Delivered with approval The ABE sets include mounting material and wheel locks Produced in Germany The wheel spacer should be fitted between the wheel and the axial hub using longer bolt snot supplied (please order separately). When ordering the longer bolts please state which cone type you require and the required extra length. All screws for the DR Systems have to be ordered separately. Bolt size M14x1,5: Citroën Evasion 22 C8 Fiat Ulysse 220/179 Lancia Zeta 220/Phedra 179 peugeot 806/807
H&R Wheel Spacers 20mm 5x108 - Hub 60,1mm - Bolt size M14x1,5 - Renault
H&R DR-System Wheel spacers:- 20mm per spacer - 40mm per axle - Bolt pattern 5x108 - Hub 60,1mm - Bolt size M14x1,5 - Renault H&R TRAK+ Wheels Spacers improve the look as well as the handling of your car with wheel spacers. TRAK+TM wheel spacers are compatible with both the stock and aftermarket wheels. Product benefits: High strength, lightweight aluminum/magnesium alloy Precision CNC machined Hard anodized for greater surface hardness and corrosion resistance Fit either stock or aftermarket wheels Compatible with OEM and aftermarket suspension systems Available for a wide range of automobiles Delivered with approval The ABE sets include mounting material and wheel locks Produced in Germany The wheel spacer should be fitted between the wheel and the axial hub using longer wheel bolts (please order separately). When ordering the longer bolts please state which cone type you require and the required extra length. All screws for the DR Systems have to be ordered separately. Renault Laguna Type G: Bolt size M12x1,5
H&R Wheel Spacers 20mm 5x108 - Hub 63,3mm - Bolt size M12x1,5 - Ford/Jaguar/Volvo
H&R DRM-System Wheel spacers:- 20mm per spacer - 40mm per axle - Bolt pattern 5x108 - Hub 63,3mm - Bolt size M12x1,5 - Ford/Jaguar/Volvo H&R TRAK+ Wheels Spacers improve the look as well as the handling of your car with wheel spacers. TRAK+TM wheel spacers are compatible with both the stock and aftermarket wheels. Product benefits: High strength, lightweight aluminum/magnesium alloy Precision CNC machined Hard anodized for greater surface hardness and corrosion resistance Fit either stock or aftermarket wheels Compatible with OEM and aftermarket suspension systems Available for a wide range of automobiles Delivered with approval Produced in Germany The wheel spacer should be attached to the axial hub using the fastening nuts provided. The wheels should then be fitted using the existing wheel nuts provided with the wheels. Using steel wheel rims in combination with DRM system is generally not possible. All fixing-accessories are included! Using the spacers with steel rims is not possible.
H&R Wheel Spacers 20mm 5x108 - Hub 63,3mm - Bolt size M12x1,5 - Ford/Jaguar/Volvo - Black
H&R DRM-System Wheel spacers:- 20mm per spacer - 40mm per axle - Bolt pattern 5x108 - Hub 63,3mm - Bolt size M12x1,5 - Ford/Jaguar/Volvo - Black H&R TRAK+ Wheels Spacers improve the look as well as the handling of your car with wheel spacers. TRAK+TM wheel spacers are compatible with both the stock and aftermarket wheels. Product benefits: High strength, lightweight aluminum/magnesium alloy Precision CNC machined Hard anodized for greater surface hardness and corrosion resistance Fit either stock or aftermarket wheels Compatible with OEM and aftermarket suspension systems Available for a wide range of automobiles Delivered with approval Produced in Germany The wheel spacer should be attached to the axial hub using the fastening nuts provided. The wheels should then be fitted using the existing wheel nuts provided with the wheels. Using steel wheel rims in combination with DRM system is generally not possible. All fixing-accessories are included! Using the spacers with steel rims is not possible.
H&R Wheel Spacers 20mm 5x108 - Hub 65,0mm - Bolt size M12x1,25 - Citroën/Opel/Peugeot/Volvo
H&R DR-System Wheel spacers:- 20mm per spacer - 40mm per axle - Bolt pattern 5x108 - Hub 65,0mm - Bolt size M12x1,25 - Citroën/Opel/Peugeot/Volvo H&R TRAK+ Wheels Spacers improve the look as well as the handling of your car with wheel spacers. TRAK+TM wheel spacers are compatible with both the stock and aftermarket wheels. Product benefits: High strength, lightweight aluminum/magnesium alloy Precision CNC machined Hard anodized for greater surface hardness and corrosion resistance Fit either stock or aftermarket wheels Compatible with OEM and aftermarket suspension systems Available for a wide range of automobiles Delivered with approval The ABE sets include mounting material and wheel locks Produced in Germany The wheel spacer should be fitted between the wheel and the axial hub using longer wheel bolts (please order separately). When ordering the longer bolts please state which cone type you require and the required extra length. All screws for the DR Systems have to be ordered separately. Citroën C4 Picasso Type 3: Using the spacers with steel rims is not possible. Peugeot 308 Type L: Using the spacers with steel rims is not possible. Volvo S60/V70: Bolt size M14x1,5 Volvo 850: Bolt size M12x1,75 Volvo S70/V70 Type L: Bolt size M12x1,75 Volvo C70 Type N: Bolt size M12x1,75 Volvo S80 Type T: Bolt size M14x1,5 Volvo S90/V90: Bolt size M12x1,75
H&R Wheel Spacers 20mm 5x98/108 - Hub 58,0mm - Bolt size M12x1,25
H&R DR-System Wheel spacers:- 20mm per spacer - 40mm per axle - Bolt pattern 5x98/108 - Hub 58,0mm - Bolt size M12x1,25 H&R TRAK+ Wheels Spacers improve the look as well as the handling of your car with wheel spacers. TRAK+TM wheel spacers are compatible with both the stock and aftermarket wheels. Product benefits: High strength, lightweight aluminum/magnesium alloy Precision CNC machined Hard anodized for greater surface hardness and corrosion resistance Fit either stock or aftermarket wheels Compatible with OEM and aftermarket suspension systems Available for a wide range of automobiles Delivered with approval The ABE sets include mounting material and wheel locks Produced in Germany The wheel spacer should be fitted between the wheel and the axial hub using longer bolt snot supplied (please order separately). When ordering the longer bolts please state which cone type you require and the required extra length. All screws for the DR Systems have to be ordered separately. Alfa Romeo 147/156 Spider/Coupé/GTV Type 916: Bolt pattern 5x98 - Bolt size M12x1,25 Alfa Romeo 164, 6-Cylinder: Bolt pattern 5x98 - Bolt size m12x1,25 Alfa Romeo 166: Bolt pattern 5x108 - Bolt size M12x1,25 Citroën Evasion 22 C8: Bolt pattern 5x98 - Bolt size M14x1,5 Fiat Ulysse 220/179: Bolt pattern 5x98 - Bolt size M14x1,5 Lancia Kappa: Bolt pattern 5x108 - Bolt size M12x1,25 Lancia Zeta 220/Phedra 179: Bolt pattern 5x98 - Bolt size m14x1,5 Peugeot 806/807: Bolt pattern 5x98 - Bolt size M14x1,5
H&R Wheel Spacers 25mm 4x108 - Hub 57,1mm - Bolt size M14x1,5 - Audi - Black
H&R DRA-System Wheel spacers:- 25mm per spacer - 50mm per axle - Bolt pattern 4x108 - Hub 57,1mm - Bolt size M14x1,5 - Audi - Black H&R TRAK+ Wheels Spacers improve the look as well as the handling of your car with wheel spacers. TRAK+TM wheel spacers are compatible with both the stock and aftermarket wheels. Product benefits: High strength, lightweight aluminum/magnesium alloy Precision CNC machined Hard anodized for greater surface hardness and corrosion resistance Fit either stock or aftermarket wheels Compatible with OEM and aftermarket suspension systems Available for a wide range of automobiles Delivered with approval The ABE sets include mounting material and wheel locks Produced in Germany The wheel spacer should be fitted to the axial hub using the fastening bolts provided. The wheels should then be fitted using the existing wheel bolts provided with the wheels. The length of the existing screw sticking out of the rim, must necessarily be smaller than the width of the wheel spacer! All fixing-accessories are included!
H&R Wheel Spacers 25mm 5x108 - Hub 58,0mm - Bolt size M12x1,25 - Alfa Romeo/Lancia
H&R DRA-System Wheel spacers:- 25mm per spacer - 50mm per axle - Bolt pattern 5x108 - Hub 58,0mm - Bolt size M12x1,25 - Alfa Romeo/Lancia H&R TRAK+ Wheels Spacers improve the look as well as the handling of your car with wheel spacers. TRAK+TM wheel spacers are compatible with both the stock and aftermarket wheels. Product benefits: High strength, lightweight aluminum/magnesium alloy Precision CNC machined Hard anodized for greater surface hardness and corrosion resistance Fit either stock or aftermarket wheels Compatible with OEM and aftermarket suspension systems Available for a wide range of automobiles Delivered with approval The ABE sets include mounting material and wheel locks Produced in Germany The wheel spacer should be fitted to the axial hub using the fastening bolts provided. The wheels should then be fitted using the existing wheel bolts provided with the wheels. The length of the existing screw sticking out of the rim, must necessarily be smaller than the width of the wheel spacer! All fixing-accessories are included!
H&R Wheel Spacers 25mm 5x108 - Hub 60,1mm - Bolt size M14x1,5 - Lotus/Renault
H&R DRA-System Wheel spacers:- 25mm per spacer - 50mm per axle - Bolt pattern 5x108 - Hub 60,1mm - Bolt size M14x1,5 - Lotus/Renault H&R TRAK+ Wheels Spacers improve the look as well as the handling of your car with wheel spacers. TRAK+TM wheel spacers are compatible with both the stock and aftermarket wheels. Product benefits: High strength, lightweight aluminum/magnesium alloy Precision CNC machined Hard anodized for greater surface hardness and corrosion resistance Fit either stock or aftermarket wheels Compatible with OEM and aftermarket suspension systems Available for a wide range of automobiles Delivered with approval The ABE sets include mounting material and wheel locks Produced in Germany The wheel spacer should be fitted to the axial hub using the fastening bolts provided. The wheels should then be fitted using the existing wheel bolts provided with the wheels. The length of the existing screw sticking out of the rim, must necessarily be smaller than the width of the wheel spacer! All fixing-accessories are included!
H&R Wheel Spacers 25mm 5x108 - Hub 63,3mm - Bolt size M12x1,5 - Ford/Jaguar/Volvo
H&R DRM-System Wheel spacers:- 25mm per spacer - 50mm per axle - Bolt pattern 5x108 - Hub 63,3mm - Bolt size M12x1,5 - Ford/Jaguar/Volvo H&R TRAK+ Wheels Spacers improve the look as well as the handling of your car with wheel spacers. TRAK+TM wheel spacers are compatible with both the stock and aftermarket wheels. Product benefits: High strength, lightweight aluminum/magnesium alloy Precision CNC machined Hard anodized for greater surface hardness and corrosion resistance Fit either stock or aftermarket wheels Compatible with OEM and aftermarket suspension systems Available for a wide range of automobiles Delivered with approval Produced in Germany The wheel spacer should be attached to the axial hub using the fastening nuts provided. The wheels should then be fitted using the existing wheel nuts provided with the wheels. Using steel wheel rims in combination with DRM system is generally not possible. All fixing-accessories are included! Not applicable with steel rims: Jaguar F-Type Type QQ6: The original stud bolts have always to be shortened!. Jaguar S-Type/X-Type Type CCX/CF1 Ford Mondeo B4Y/B5Y/BWY Ford Mondeo BA 6 (up to model 2014) Volvo C30 Type M Volvo V40 Type M Volvo S40/V50 Type M
H&R Wheel Spacers 25mm 5x108 - Hub 63,3mm - Bolt size M12x1,5 - Ford/Jaguar/Volvo - Black
H&R DRM-System Wheel spacers:- 25mm per spacer - 50mm per axle - Bolt pattern 5x108 - Hub 63,3mm - Bolt size M12x1,5 - Ford/Jaguar/Volvo - Black H&R TRAK+ Wheels Spacers improve the look as well as the handling of your car with wheel spacers. TRAK+TM wheel spacers are compatible with both the stock and aftermarket wheels. Product benefits: High strength, lightweight aluminum/magnesium alloy Precision CNC machined Hard anodized for greater surface hardness and corrosion resistance Fit either stock or aftermarket wheels Compatible with OEM and aftermarket suspension systems Available for a wide range of automobiles Delivered with approval Produced in Germany The wheel spacer should be attached to the axial hub using the fastening nuts provided. The wheels should then be fitted using the existing wheel nuts provided with the wheels. Using steel wheel rims in combination with DRM system is generally not possible. All fixing-accessories are included! Not applicable with steel rims: Jaguar F-Type Type QQ6: The original stud bolts have always to be shortened!. Jaguar S-Type/X-Type Type CCX/CF1 Ford Mondeo B4Y/B5Y/BWY Ford Mondeo BA 6 (up to model 2014) Volvo C30 Type M Volvo V40 Type M Volvo S40/V50 Type M
H&R Wheel Spacers 25mm 5x108 - Hub 65,0mm
H&R DRM-System Wheel spacers:- 25mm per spacer - 50mm per axle - Bolt pattern 5x108 - Hub 65,0mm H&R TRAK+ Wheels Spacers improve the look as well as the handling of your car with wheel spacers. TRAK+TM wheel spacers are compatible with both the stock and aftermarket wheels. Product benefits: High strength, lightweight aluminum/magnesium alloy Precision CNC machined Hard anodized for greater surface hardness and corrosion resistance Fit either stock or aftermarket wheels Compatible with OEM and aftermarket suspension systems Available for a wide range of automobiles Delivered with approval Produced in Germany The wheel spacer should be attached to the axial hub using the fastening nuts provided. The wheels should then be fitted using the existing wheel nuts provided with the wheels. Using steel wheel rims in combination with DRM system is generally not possible. All fixing-accessories are included!