H&R Wheel Spacers 20mm 4x100 - Hub 56,6mm - Bolt size M12x1,5 - Chevrolet/Fiat/Opel/Vauxhall
H&R DR-System Wheel spacers:- 20mm per spacer - 40mm per axle - Bolt pattern 4x100 - Hub 56,6mm - Bolt size M12x1,5 - Chevrolet/Fiat/Opel/Vauxhall H&R TRAK+ Wheels Spacers improve the look as well as the handling of your car with wheel spacers. TRAK+TM wheel spacers are compatible with both the stock and aftermarket wheels. Product benefits: High strength, lightweight aluminum/magnesium alloy Precision CNC machined Hard anodized for greater surface hardness and corrosion resistance Fit either stock or aftermarket wheels Compatible with OEM and aftermarket suspension systems Available for a wide range of automobiles Delivered with approval The ABE sets include mounting material and wheel locks Produced in Germany The wheel spacer should be fitted between the wheel and the axial hub using longer wheel bolts (please order separately). When ordering the longer bolts please state which cone type you require and the required extra length. All screws for the DR Systems have to be ordered separately.
H&R Wheel Spacers 20mm 4x100 - Hub 56,6mm - Bolt size M12x1,5 - Fiat/Opel/Vauxhall
H&R DRA-System Wheel spacers:- 20mm per spacer - 40mm per axle - Bolt pattern 4x100 - Hub 56,6mm - Bolt size M12x1,5 - Fiat/Opel/Vauxhall H&R TRAK+ Wheels Spacers improve the look as well as the handling of your car with wheel spacers. TRAK+TM wheel spacers are compatible with both the stock and aftermarket wheels. Product benefits: High strength, lightweight aluminum/magnesium alloy Precision CNC machined Hard anodized for greater surface hardness and corrosion resistance Fit either stock or aftermarket wheels Compatible with OEM and aftermarket suspension systems Available for a wide range of automobiles Delivered with approval The ABE sets include mounting material and wheel locks Produced in Germany The wheel spacer should be fitted to the axial hub using the fastening bolts provided. The wheels should then be fitted using the existing wheel bolts provided with the wheels. The length of the existing screw sticking out of the rim, must necessarily be smaller than the width of the wheel spacer! All fixing-accessories are included!
H&R Wheel Spacers 20mm 4x100 - Hub 57,1mm - Bolt size M12x1,5 - Opel/Vauxhall
H&R DRS-System Wheel spacers:- 20mm per spacer - 40mm per axle - Bolt pattern 4x100 - Hub 57,1mm - Bolt size M12x1,5 - Opel/Vauxhall H&R TRAK+ Wheels Spacers improve the look as well as the handling of your car with wheel spacers. TRAK+TM wheel spacers are compatible with both the stock and aftermarket wheels. Product benefits: High strength, lightweight aluminum/magnesium alloy Precision CNC machined Hard anodized for greater surface hardness and corrosion resistance Fit either stock or aftermarket wheels Compatible with OEM and aftermarket suspension systems Available for a wide range of automobiles Delivered with approval The ABE sets include mounting material and wheel locks Produced in Germany The fitting of the DRS-System requires the exchange in the wheel flanges or the brake drums, of the existing knurl bolts with the appropriate longer H&R knurl bolts. The longer H&R knurl bolts are supplied. The wheels should then be fitted using the existing wheel nuts provided with the wheels. All fixing-accessories are included!
H&R Wheel Spacers 20mm 4x100 - Hub 57,1mm - Bolt size M12x1,5 - Seat/Volkswagen
H&R DRA-System Wheel spacers:- 20mm per spacer - 40mm per axle - Bolt pattern 4x100 - Hub 57,1mm - Bolt size M12x1,5 - Seat/Volkswagen H&R TRAK+ Wheels Spacers improve the look as well as the handling of your car with wheel spacers. TRAK+TM wheel spacers are compatible with both the stock and aftermarket wheels. Product benefits: High strength, lightweight aluminum/magnesium alloy Precision CNC machined Hard anodized for greater surface hardness and corrosion resistance Fit either stock or aftermarket wheels Compatible with OEM and aftermarket suspension systems Available for a wide range of automobiles Delivered with approval The ABE sets include mounting material and wheel locks Produced in Germany The wheel spacer should be fitted to the axial hub using the fastening bolts provided. The wheels should then be fitted using the existing wheel bolts provided with the wheels. The length of the existing screw sticking out of the rim, must necessarily be smaller than the width of the wheel spacer! All fixing-accessories are included!
H&R Wheel Spacers 20mm 4x100 - Hub 57,1mm - Bolt size M12x1,5 - Seat/Volkswagen - Black
H&R DRA-System Wheel spacers:- 20mm per spacer - 40mm per axle - Bolt pattern 4x100 - Hub 57,1mm - Bolt size M12x1,5 - Seat/Volkswagen - Black H&R TRAK+ Wheels Spacers improve the look as well as the handling of your car with wheel spacers. TRAK+TM wheel spacers are compatible with both the stock and aftermarket wheels. Product benefits: High strength, lightweight aluminum/magnesium alloy Precision CNC machined Hard anodized for greater surface hardness and corrosion resistance Fit either stock or aftermarket wheels Compatible with OEM and aftermarket suspension systems Available for a wide range of automobiles Delivered with approval The ABE sets include mounting material and wheel locks Produced in Germany The wheel spacer should be fitted to the axial hub using the fastening bolts provided. The wheels should then be fitted using the existing wheel bolts provided with the wheels. The length of the existing screw sticking out of the rim, must necessarily be smaller than the width of the wheel spacer! All fixing-accessories are included!
H&R Wheel Spacers 20mm 4x100 - Hub 59,1mm - Bolt size M12x1,25 - Nissan
H&R DRS-System Wheel spacers:- 20mm per spacer - 40mm per axle - Bolt pattern 4x100 - Hub 59,1mm - Bolt size M12x1,25 - Nissan H&R TRAK+ Wheels Spacers improve the look as well as the handling of your car with wheel spacers. TRAK+TM wheel spacers are compatible with both the stock and aftermarket wheels. Product benefits: High strength, lightweight aluminum/magnesium alloy Precision CNC machined Hard anodized for greater surface hardness and corrosion resistance Fit either stock or aftermarket wheels Compatible with OEM and aftermarket suspension systems Available for a wide range of automobiles Delivered with approval The ABE sets include mounting material and wheel locks Produced in Germany The fitting of the DRS-System requires the exchange in the wheel flanges or the brake drums, of the existing knurl bolts with the appropriate longer H&R knurl bolts. The longer H&R knurl bolts are supplied. The wheels should then be fitted using the existing wheel nuts provided with the wheels. All fixing-accessories are included!
H&R Wheel Spacers 20mm 4x100 - Hub 60,1mm - Bolt size M12x1,5 - Dacia/Nissan/Renault/Smart
H&R DR-System Wheel spacers:- 20mm per spacer - 40mm per axle - Bolt pattern 4x100 - Hub 60,1mm - Bolt size M12x1,5 - Dacia/Nissan/Renault/Smart H&R TRAK+ Wheels Spacers improve the look as well as the handling of your car with wheel spacers. TRAK+TM wheel spacers are compatible with both the stock and aftermarket wheels. Product benefits: High strength, lightweight aluminum/magnesium alloy Precision CNC machined Hard anodized for greater surface hardness and corrosion resistance Fit either stock or aftermarket wheels Compatible with OEM and aftermarket suspension systems Available for a wide range of automobiles Delivered with approval The ABE sets include mounting material and wheel locks Produced in Germany The wheel spacer should be fitted between the wheel and the axial hub using longer wheel bolts (please order separately). When ordering the longer bolts please state which cone type you require and the required extra length. All screws for the DR Systems have to be ordered separately. Nissan Micra: Bolt size M12x1,25 Renault Clio D (IV) Type R and Smart: Using the spacers with steel rims is not possible.
H&R Wheel Spacers 20mm 4x100 - Hub 60,1mm - Bolt size M12x1,5 - Dacia/Nissan/Renault/Smart
H&R DRA-System Wheel spacers:- 20mm per spacer - 40mm per axle - Bolt pattern 4x100 - Hub 60,1mm - Bolt size M12x1,5 - Dacia/Nissan/Renault/Smart H&R TRAK+ Wheels Spacers improve the look as well as the handling of your car with wheel spacers. TRAK+TM wheel spacers are compatible with both the stock and aftermarket wheels. Product benefits: High strength, lightweight aluminum/magnesium alloy Precision CNC machined Hard anodized for greater surface hardness and corrosion resistance Fit either stock or aftermarket wheels Compatible with OEM and aftermarket suspension systems Available for a wide range of automobiles Delivered with approval The ABE sets include mounting material and wheel locks Produced in Germany The wheel spacer should be fitted to the axial hub using the fastening bolts provided. The wheels should then be fitted using the existing wheel bolts provided with the wheels. The length of the existing screw sticking out of the rim, must necessarily be smaller than the width of the wheel spacer! All fixing-accessories are included! Renault Clio and Smart: Using the spacers with steel rims is not possible.
H&R Wheel Spacers 20mm 4x100/108 - Hub 57,1mm - Bolt size M12x1,5 - Audi/BMW/Seat/Skoda/Volkswagen
H&R DR-System Wheel spacers:- 20mm per spacer - 40mm per axle - Bolt pattern 4x100/108 - Hub 57,1mm - Bolt size M12x1,5 - Audi/BMW/Seat/Skoda/Volkswagen H&R TRAK+ Wheels Spacers improve the look as well as the handling of your car with wheel spacers. TRAK+TM wheel spacers are compatible with both the stock and aftermarket wheels. Product benefits: High strength, lightweight aluminum/magnesium alloy Precision CNC machined Hard anodized for greater surface hardness and corrosion resistance Fit either stock or aftermarket wheels Compatible with OEM and aftermarket suspension systems Available for a wide range of automobiles Delivered with approval The ABE sets include mounting material and wheel locks Produced in Germany The wheel spacer should be fitted between the wheel and the axial hub using longer bolt snot supplied (please order separately). When ordering the longer bolts please state which cone type you require and the required extra length. All screws for the DR Systems have to be ordered separately. Attention: Audi - Bolt size M14x1,5 - Bolt pattern 4x108
H&R Wheel Spacers 20mm 4x100/108 - Hub 57,1mm - Bolt size M12x1,5 - Audi/BMW/Seat/Skoda/Volkswagen - Black
H&R DR-System Wheel spacers:- 20mm per spacer - 40mm per axle - Bolt pattern 4x100/108 - Hub 57,1mm - Bolt size M12x1,5 - Audi/BMW/Seat/Skoda/Volkswagen - Black H&R TRAK+ Wheels Spacers improve the look as well as the handling of your car with wheel spacers. TRAK+TM wheel spacers are compatible with both the stock and aftermarket wheels. Product benefits: High strength, lightweight aluminum/magnesium alloy Precision CNC machined Hard anodized for greater surface hardness and corrosion resistance Fit either stock or aftermarket wheels Compatible with OEM and aftermarket suspension systems Available for a wide range of automobiles Delivered with approval The ABE sets include mounting material and wheel locks Produced in Germany The wheel spacer should be fitted between the wheel and the axial hub using longer bolt snot supplied (please order separately). When ordering the longer bolts please state which cone type you require and the required extra length. All screws for the DR Systems have to be ordered separately. Attention: Audi - Bolt size M14x1,5 - Bolt pattern 4x108
H&R Wheel Spacers 25mm 4x100 - Hub 54,1mm - Bolt size M12x1,25 - Suzuki Baleno EG
H&R DRM-System Wheel spacers:- 25mm per spacer - 50mm per axle - Bolt pattern 4x100 - Hub 54,1mm - Bolt size M12x1,25 - Suzuki Baleno EG H&R TRAK+ Wheels Spacers improve the look as well as the handling of your car with wheel spacers. TRAK+TM wheel spacers are compatible with both the stock and aftermarket wheels. Product benefits: High strength, lightweight aluminum/magnesium alloy Precision CNC machined Hard anodized for greater surface hardness and corrosion resistance Fit either stock or aftermarket wheels Compatible with OEM and aftermarket suspension systems Available for a wide range of automobiles Delivered with approval Produced in Germany The wheel spacer should be attached to the axial hub using the fastening nuts provided. The wheels should then be fitted using the existing wheel nuts provided with the wheels. Using steel wheel rims in combination with DRM system is generally not possible. All fixing-accessories are included!
H&R Wheel Spacers 25mm 4x100 - Hub 54,1mm - Bolt size M12x1,5 - Daihatsu/Fiat/Hyundai/Kia/Mazda/Toyota
H&R DRM-System Wheel spacers:- 25mm per spacer - 50mm per axle - Bolt pattern 4x100 - Hub 54,1mm - Bolt size M12x1,5 - Daihatsu/Fiat/Hyundai/Kia/Mazda/Toyota H&R TRAK+ Wheels Spacers improve the look as well as the handling of your car with wheel spacers. TRAK+TM wheel spacers are compatible with both the stock and aftermarket wheels. Product benefits: High strength, lightweight aluminum/magnesium alloy Precision CNC machined Hard anodized for greater surface hardness and corrosion resistance Fit either stock or aftermarket wheels Compatible with OEM and aftermarket suspension systems Available for a wide range of automobiles Delivered with approval Produced in Germany The wheel spacer should be attached to the axial hub using the fastening nuts provided. The wheels should then be fitted using the existing wheel nuts provided with the wheels. Using steel wheel rims in combination with DRM system is generally not possible. All fixing-accessories are included! Not applicable with steel rims: Fiat 124 Spider Type NF Kia Picanto Type TA Mazda MX-5 Type ND Mazda 2 Type DE/DE1 Toyota Yaris Type XP13M(a)/XP13N(a)
H&R Wheel Spacers 25mm 4x100 - Hub 54,1mm - Bolt size M12x1,5 - Daihatsu/Fiat/Hyundai/Kia/Mazda/Toyota - Black
H&R DRM-System Wheel spacers:- 25mm per spacer - 50mm per axle - Bolt pattern 4x100 - Hub 54,1mm - Bolt size M12x1,5 - Daihatsu/Fiat/Hyundai/Kia/Mazda/Toyota - Black H&R TRAK+ Wheels Spacers improve the look as well as the handling of your car with wheel spacers. TRAK+TM wheel spacers are compatible with both the stock and aftermarket wheels. Product benefits: High strength, lightweight aluminum/magnesium alloy Precision CNC machined Hard anodized for greater surface hardness and corrosion resistance Fit either stock or aftermarket wheels Compatible with OEM and aftermarket suspension systems Available for a wide range of automobiles Delivered with approval Produced in Germany The wheel spacer should be attached to the axial hub using the fastening nuts provided. The wheels should then be fitted using the existing wheel nuts provided with the wheels. Using steel wheel rims in combination with DRM system is generally not possible. All fixing-accessories are included! Not applicable with steel rims: Fiat 124 Spider Type NF Kia Picanto Type TA Mazda MX-5 Type ND Mazda 2 Type DE/DE1 Toyota Yaris Type XP13M(a)/XP13N(a)
H&R Wheel Spacers 25mm 4x100 - Hub 56,1mm - Bolt size M12x1,5 - Daihatsu/Honda/Kia/Mitsubishi/Proton/Rover
H&R DRM-System Wheel spacers:- 25mm per spacer - 50mm per axle - Bolt pattern 4x100 - Hub 56,1mm - Bolt size M12x1,5 - Daihatsu/Honda/Kia/Mitsubishi/Proton/Rover H&R TRAK+ Wheels Spacers improve the look as well as the handling of your car with wheel spacers. TRAK+TM wheel spacers are compatible with both the stock and aftermarket wheels. Product benefits: High strength, lightweight aluminum/magnesium alloy Precision CNC machined Hard anodized for greater surface hardness and corrosion resistance Fit either stock or aftermarket wheels Compatible with OEM and aftermarket suspension systems Available for a wide range of automobiles Delivered with approval Produced in Germany The wheel spacer should be attached to the axial hub using the fastening nuts provided. The wheels should then be fitted using the existing wheel nuts provided with the wheels. Using steel wheel rims in combination with DRM system is generally not possible. All fixing-accessories are included!
H&R Wheel Spacers 25mm 4x100 - Hub 56,6mm - Bolt size M12x1,5 - Chevrolet/Fiat/Opel/Vauxhall
H&R DRA-System Wheel spacers:- 25mm per spacer - 50mm per axle - Bolt pattern 4x100 - Hub 56,6mm - Bolt size M12x1,5 - Chevrolet/Fiat/Opel/Vauxhall H&R TRAK+ Wheels Spacers improve the look as well as the handling of your car with wheel spacers. TRAK+TM wheel spacers are compatible with both the stock and aftermarket wheels. Product benefits: High strength, lightweight aluminum/magnesium alloy Precision CNC machined Hard anodized for greater surface hardness and corrosion resistance Fit either stock or aftermarket wheels Compatible with OEM and aftermarket suspension systems Available for a wide range of automobiles Delivered with approval The ABE sets include mounting material and wheel locks Produced in Germany The wheel spacer should be fitted to the axial hub using the fastening bolts provided. The wheels should then be fitted using the existing wheel bolts provided with the wheels. The length of the existing screw sticking out of the rim, must necessarily be smaller than the width of the wheel spacer! All fixing-accessories are included!
H&R Wheel Spacers 25mm 4x100 - Hub 57,1mm - Bolt size M12x1,5 - BMW/Seat/Skoda/Volkswagen
H&R DRA-System Wheel spacers:- 25mm per spacer - 50mm per axle - Bolt pattern 4x100 - Hub 57,1mm - Bolt size M12x1,5 - BMW/Seat/Skoda/Volkswagen H&R TRAK+ Wheels Spacers improve the look as well as the handling of your car with wheel spacers. TRAK+TM wheel spacers are compatible with both the stock and aftermarket wheels. Product benefits: High strength, lightweight aluminum/magnesium alloy Precision CNC machined Hard anodized for greater surface hardness and corrosion resistance Fit either stock or aftermarket wheels Compatible with OEM and aftermarket suspension systems Available for a wide range of automobiles Delivered with approval The ABE sets include mounting material and wheel locks Produced in Germany The wheel spacer should be fitted to the axial hub using the fastening bolts provided. The wheels should then be fitted using the existing wheel bolts provided with the wheels. The length of the existing screw sticking out of the rim, must necessarily be smaller than the width of the wheel spacer! All fixing-accessories are included!
H&R Wheel Spacers 25mm 4x100 - Hub 57,1mm - Bolt size M12x1,5 - BMW/Seat/Skoda/Volkswagen - Black
H&R DRA-System Wheel spacers:- 25mm per spacer - 50mm per axle - Bolt pattern 4x100 - Hub 57,1mm - Bolt size M12x1,5 - BMW/Seat/Skoda/Volkswagen - Black H&R TRAK+ Wheels Spacers improve the look as well as the handling of your car with wheel spacers. TRAK+TM wheel spacers are compatible with both the stock and aftermarket wheels. Product benefits: High strength, lightweight aluminum/magnesium alloy Precision CNC machined Hard anodized for greater surface hardness and corrosion resistance Fit either stock or aftermarket wheels Compatible with OEM and aftermarket suspension systems Available for a wide range of automobiles Delivered with approval The ABE sets include mounting material and wheel locks Produced in Germany The wheel spacer should be fitted to the axial hub using the fastening bolts provided. The wheels should then be fitted using the existing wheel bolts provided with the wheels. The length of the existing screw sticking out of the rim, must necessarily be smaller than the width of the wheel spacer! All fixing-accessories are included!
H&R Wheel Spacers 25mm 4x100 - Hub 57,1mm - Bolt size M12x1,5 - Opel/Vauxhall
H&R DRM-System Wheel spacers:- 25mm per spacer - 50mm per axle - Bolt pattern 4x100 - Hub 57,1mm - Bolt size M12x1,5 - Opel/Vauxhall H&R TRAK+ Wheels Spacers improve the look as well as the handling of your car with wheel spacers. TRAK+TM wheel spacers are compatible with both the stock and aftermarket wheels. Product benefits: High strength, lightweight aluminum/magnesium alloy Precision CNC machined Hard anodized for greater surface hardness and corrosion resistance Fit either stock or aftermarket wheels Compatible with OEM and aftermarket suspension systems Available for a wide range of automobiles Delivered with approval Produced in Germany The wheel spacer should be attached to the axial hub using the fastening nuts provided. The wheels should then be fitted using the existing wheel nuts provided with the wheels. Using steel wheel rims in combination with DRM system is generally not possible. All fixing-accessories are included!
H&R Wheel Spacers 25mm 4x100 - Hub 59,1mm - Bolt size M12x1,25 - Nissan/Subaru
H&R DRM-System Wheel spacers:- 25mm per spacer - 50mm per axle - Bolt pattern 4x100 - Hub 59,1mm - Bolt size M12x1,25 - Nissan/Subaru H&R TRAK+ Wheels Spacers improve the look as well as the handling of your car with wheel spacers. TRAK+TM wheel spacers are compatible with both the stock and aftermarket wheels. Product benefits: High strength, lightweight aluminum/magnesium alloy Precision CNC machined Hard anodized for greater surface hardness and corrosion resistance Fit either stock or aftermarket wheels Compatible with OEM and aftermarket suspension systems Available for a wide range of automobiles Delivered with approval Produced in Germany The wheel spacer should be attached to the axial hub using the fastening nuts provided. The wheels should then be fitted using the existing wheel nuts provided with the wheels. Using steel wheel rims in combination with DRM system is generally not possible. All fixing-accessories are included!
H&R Wheel Spacers 25mm 4x100 - Hub 60,1mm - Bolt size M12x1,5 - Dacia/Nissan/Renault/Smart
H&R DRA-System Wheel spacers:- 25mm per spacer - 50mm per axle - Bolt pattern 4x100 - Hub 60,1mm - Bolt size M12x1,5 - Dacia/Nissan/Renault/Smart H&R TRAK+ Wheels Spacers improve the look as well as the handling of your car with wheel spacers. TRAK+TM wheel spacers are compatible with both the stock and aftermarket wheels. Product benefits: High strength, lightweight aluminum/magnesium alloy Precision CNC machined Hard anodized for greater surface hardness and corrosion resistance Fit either stock or aftermarket wheels Compatible with OEM and aftermarket suspension systems Available for a wide range of automobiles Delivered with approval The ABE sets include mounting material and wheel locks Produced in Germany The wheel spacer should be fitted to the axial hub using the fastening bolts provided. The wheels should then be fitted using the existing wheel bolts provided with the wheels. The length of the existing screw sticking out of the rim, must necessarily be smaller than the width of the wheel spacer! All fixing-accessories are included! Nissan Micra K12: Bolt size M12x1,25 Smart: Using the spacers with steel rims is not possible.
H&R Wheel Spacers 30mm 4x100 - Hub 56,6mm - Bolt size M12x1,5 - Fiat/Opel/Vauxhall
H&R DRA-System Wheel spacers:- 30mm per spacer - 60mm per axle - Bolt pattern 4x100 - Hub 56,6mm - Bolt size M12x1,5 - Fiat/Opel/Vauxhall H&R TRAK+ Wheels Spacers improve the look as well as the handling of your car with wheel spacers. TRAK+TM wheel spacers are compatible with both the stock and aftermarket wheels. Product benefits: High strength, lightweight aluminum/magnesium alloy Precision CNC machined Hard anodized for greater surface hardness and corrosion resistance Fit either stock or aftermarket wheels Compatible with OEM and aftermarket suspension systems Available for a wide range of automobiles Delivered with approval The ABE sets include mounting material and wheel locks Produced in Germany The wheel spacer should be fitted to the axial hub using the fastening bolts provided. The wheels should then be fitted using the existing wheel bolts provided with the wheels. The length of the existing screw sticking out of the rim, must necessarily be smaller than the width of the wheel spacer! All fixing-accessories are included!
H&R Wheel Spacers 30mm 4x100 - Hub 57,1mm - Bolt size M12x1,5 - BMW/Seat/Volkswagen
H&R DRA-System Wheel spacers:- 30mm per spacer - 60mm per axle - Bolt pattern 4x100 - Hub 57,1mm - Bolt size M12x1,5 - BMW/Seat/Volkswagen H&R TRAK+ Wheels Spacers improve the look as well as the handling of your car with wheel spacers. TRAK+TM wheel spacers are compatible with both the stock and aftermarket wheels. Product benefits: High strength, lightweight aluminum/magnesium alloy Precision CNC machined Hard anodized for greater surface hardness and corrosion resistance Fit either stock or aftermarket wheels Compatible with OEM and aftermarket suspension systems Available for a wide range of automobiles Delivered with approval The ABE sets include mounting material and wheel locks Produced in Germany The wheel spacer should be fitted to the axial hub using the fastening bolts provided. The wheels should then be fitted using the existing wheel bolts provided with the wheels. The length of the existing screw sticking out of the rim, must necessarily be smaller than the width of the wheel spacer! All fixing-accessories are included!
H&R Wheel Spacers 30mm 4x100 - Hub 57,1mm - Bolt size M12x1,5 - BMW/Seat/Volkswagen - Black
H&R DRA-System Wheel spacers:- 30mm per spacer - 60mm per axle - Bolt pattern 4x100 - Hub 57,1mm - Bolt size M12x1,5 - BMW/Seat/Volkswagen - Black H&R TRAK+ Wheels Spacers improve the look as well as the handling of your car with wheel spacers. TRAK+TM wheel spacers are compatible with both the stock and aftermarket wheels. Product benefits: High strength, lightweight aluminum/magnesium alloy Precision CNC machined Hard anodized for greater surface hardness and corrosion resistance Fit either stock or aftermarket wheels Compatible with OEM and aftermarket suspension systems Available for a wide range of automobiles Delivered with approval The ABE sets include mounting material and wheel locks Produced in Germany The wheel spacer should be fitted to the axial hub using the fastening bolts provided. The wheels should then be fitted using the existing wheel bolts provided with the wheels. The length of the existing screw sticking out of the rim, must necessarily be smaller than the width of the wheel spacer! All fixing-accessories are included!
H&R Wheel Spacers 5mm 4x100 - Hub 52,1mm - Bolt size M12x1,25 - Volvo
H&R DR-System Wheel spacers:- 5mm per spacer - 10mm per axle - Bolt pattern 4x100 - Hub 52,1mm - Bolt size M12x1,25 - Volvo H&R TRAK+ Wheels Spacers improve the look as well as the handling of your car with wheel spacers. TRAK+TM wheel spacers are compatible with both the stock and aftermarket wheels. Product benefits: High strength, lightweight aluminum/magnesium alloy Precision CNC machined Hard anodized for greater surface hardness and corrosion resistance Fit either stock or aftermarket wheels Compatible with OEM and aftermarket suspension systems Available for a wide range of automobiles Delivered with approval The ABE sets include mounting material and wheel locks Produced in Germany The wheel spacer should be fitted between the wheel and the axial hub using longer wheel bolts (please order separately). When ordering the longer bolts please state which cone type you require and the required extra length. All screws for the DR Systems have to be ordered separately.
H&R Wheel Spacers 5mm 4x100 - Hub 54,1mm - Bolt size M12x1,5 - Hyundai/Toyota
H&R DRS-System Wheel spacers:- 5mm per spacer - 10mm per axle - Bolt pattern 4x100 - Hub 54,1mm - Bolt size M12x1,5 - Hyundai/Toyota H&R TRAK+ Wheels Spacers improve the look as well as the handling of your car with wheel spacers. TRAK+TM wheel spacers are compatible with both the stock and aftermarket wheels. Product benefits: High strength, lightweight aluminum/magnesium alloy Precision CNC machined Hard anodized for greater surface hardness and corrosion resistance Fit either stock or aftermarket wheels Compatible with OEM and aftermarket suspension systems Available for a wide range of automobiles Delivered with approval The ABE sets include mounting material and wheel locks Produced in Germany The fitting of the DRS-System requires the exchange in the wheel flanges or the brake drums, of the existing knurl bolts with the appropriate longer H&R knurl bolts. The longer H&R knurl bolts are supplied. The wheels should then be fitted using the existing wheel nuts provided with the wheels. All fixing-accessories are included!
H&R Wheel Spacers 5mm 4x100 - Hub 54,1mm - Bolt size M12x1,5 - Mazda
H&R DRS-System Wheel spacers:- 5mm per spacer - 10mm per axle - Bolt pattern 4x100 - Hub 54,1mm - Bolt size M12x1,5 - Mazda H&R TRAK+ Wheels Spacers improve the look as well as the handling of your car with wheel spacers. TRAK+TM wheel spacers are compatible with both the stock and aftermarket wheels. Product benefits: High strength, lightweight aluminum/magnesium alloy Precision CNC machined Hard anodized for greater surface hardness and corrosion resistance Fit either stock or aftermarket wheels Compatible with OEM and aftermarket suspension systems Available for a wide range of automobiles Delivered with approval The ABE sets include mounting material and wheel locks Produced in Germany The fitting of the DRS-System requires the exchange in the wheel flanges or the brake drums, of the existing knurl bolts with the appropriate longer H&R knurl bolts. The longer H&R knurl bolts are supplied. The wheels should then be fitted using the existing wheel nuts provided with the wheels. All fixing-accessories are included!
H&R Wheel Spacers 5mm 4x100 - Hub 56,1mm - Bolt size M12x1,5 - Daihatsu
H&R DRS-System Wheel spacers:- 5mm per spacer - 10mm per axle - Bolt pattern 4x100 - Hub 56,1mm - Bolt size M12x1,5 - Daihatsu H&R TRAK+ Wheels Spacers improve the look as well as the handling of your car with wheel spacers. TRAK+TM wheel spacers are compatible with both the stock and aftermarket wheels. Product benefits: High strength, lightweight aluminum/magnesium alloy Precision CNC machined Hard anodized for greater surface hardness and corrosion resistance Fit either stock or aftermarket wheels Compatible with OEM and aftermarket suspension systems Available for a wide range of automobiles Delivered with approval The ABE sets include mounting material and wheel locks Produced in Germany The fitting of the DRS-System requires the exchange in the wheel flanges or the brake drums, of the existing knurl bolts with the appropriate longer H&R knurl bolts. The longer H&R knurl bolts are supplied. The wheels should then be fitted using the existing wheel nuts provided with the wheels. All fixing-accessories are included!
H&R Wheel Spacers 5mm 4x100 - Hub 56,1mm - Bolt size M12x1,5 - Honda/Rover
H&R DRS-System Wheel spacers:- 5mm per spacer - 10mm per axle - Bolt pattern 4x100 - Hub 56,1mm - Bolt size M12x1,5 - Honda/Rover H&R TRAK+ Wheels Spacers improve the look as well as the handling of your car with wheel spacers. TRAK+TM wheel spacers are compatible with both the stock and aftermarket wheels. Product benefits: High strength, lightweight aluminum/magnesium alloy Precision CNC machined Hard anodized for greater surface hardness and corrosion resistance Fit either stock or aftermarket wheels Compatible with OEM and aftermarket suspension systems Available for a wide range of automobiles Delivered with approval The ABE sets include mounting material and wheel locks Produced in Germany The fitting of the DRS-System requires the exchange in the wheel flanges or the brake drums, of the existing knurl bolts with the appropriate longer H&R knurl bolts. The longer H&R knurl bolts are supplied. The wheels should then be fitted using the existing wheel nuts provided with the wheels. All fixing-accessories are included!
H&R Wheel Spacers 5mm 4x100 - Hub 56,1mm - Bolt size M12x1,5 - Mitsubishi
H&R DRS-System Wheel spacers:- 5mm per spacer - 10mm per axle - Bolt pattern 4x100 - Hub 56,1mm - Bolt size M12x1,5 - Mitsubishi H&R TRAK+ Wheels Spacers improve the look as well as the handling of your car with wheel spacers. TRAK+TM wheel spacers are compatible with both the stock and aftermarket wheels. Product benefits: High strength, lightweight aluminum/magnesium alloy Precision CNC machined Hard anodized for greater surface hardness and corrosion resistance Fit either stock or aftermarket wheels Compatible with OEM and aftermarket suspension systems Available for a wide range of automobiles Delivered with approval The ABE sets include mounting material and wheel locks Produced in Germany The fitting of the DRS-System requires the exchange in the wheel flanges or the brake drums, of the existing knurl bolts with the appropriate longer H&R knurl bolts. The longer H&R knurl bolts are supplied. The wheels should then be fitted using the existing wheel nuts provided with the wheels. All fixing-accessories are included!
H&R Wheel Spacers 5mm 4x100 - Hub 56,1mm - Bolt size M12x1,5 - Proton Persona
H&R DRS-System Wheel spacers:- 5mm per spacer - 10mm per axle - Bolt pattern 4x100 - Hub 56,1mm - Bolt size M12x1,5 - Proton Persona H&R TRAK+ Wheels Spacers improve the look as well as the handling of your car with wheel spacers. TRAK+TM wheel spacers are compatible with both the stock and aftermarket wheels. Product benefits: High strength, lightweight aluminum/magnesium alloy Precision CNC machined Hard anodized for greater surface hardness and corrosion resistance Fit either stock or aftermarket wheels Compatible with OEM and aftermarket suspension systems Available for a wide range of automobiles Delivered with approval The ABE sets include mounting material and wheel locks Produced in Germany The fitting of the DRS-System requires the exchange in the wheel flanges or the brake drums, of the existing knurl bolts with the appropriate longer H&R knurl bolts. The longer H&R knurl bolts are supplied. The wheels should then be fitted using the existing wheel nuts provided with the wheels. All fixing-accessories are included!
H&R Wheel Spacers 5mm 4x100 - Hub 56,6mm - Bolt size M12x1,5 - Opel/Vauxhall/Chevrolet/Fiat
H&R DR-System Wheel spacers:- 5mm per spacer - 10mm per axle - Bolt pattern 4x100 - Hub 56,6mm - Bolt size M12x1,5 - Opel/Vauxhall/Chevrolet/Fiat H&R TRAK+ Wheels Spacers improve the look as well as the handling of your car with wheel spacers. TRAK+TM wheel spacers are compatible with both the stock and aftermarket wheels. Product benefits: High strength, lightweight aluminum/magnesium alloy Precision CNC machined Hard anodized for greater surface hardness and corrosion resistance Fit either stock or aftermarket wheels Compatible with OEM and aftermarket suspension systems Available for a wide range of automobiles Delivered with approval The ABE sets include mounting material and wheel locks Produced in Germany The wheel spacer should be fitted between the wheel and the axial hub using longer wheel bolts (please order separately). When ordering the longer bolts please state which cone type you require and the required extra length. All screws for the DR Systems have to be ordered separately.
H&R Wheel Spacers 5mm 4x100 - Hub 57,1mm - Bolt size M12x1,5 - Opel/Vauxhall
H&R DRS-System Wheel spacers:- 5mm per spacer - 10mm per axle - Bolt pattern 4x100 - Hub 57,1mm - Bolt size M12x1,5 - Opel/Vauxhall H&R TRAK+ Wheels Spacers improve the look as well as the handling of your car with wheel spacers. TRAK+TM wheel spacers are compatible with both the stock and aftermarket wheels. Product benefits: High strength, lightweight aluminum/magnesium alloy Precision CNC machined Hard anodized for greater surface hardness and corrosion resistance Fit either stock or aftermarket wheels Compatible with OEM and aftermarket suspension systems Available for a wide range of automobiles Delivered with approval The ABE sets include mounting material and wheel locks Produced in Germany The fitting of the DRS-System requires the exchange in the wheel flanges or the brake drums, of the existing knurl bolts with the appropriate longer H&R knurl bolts. The longer H&R knurl bolts are supplied. The wheels should then be fitted using the existing wheel nuts provided with the wheels. All fixing-accessories are included!
H&R Wheel Spacers 5mm 4x100 - Hub 59,1mm - Bolt size M12x1,25 - Nissan/Subaru
H&R DRS-System Wheel spacers:- 5mm per spacer - 10mm per axle - Bolt pattern 4x100 - Hub 59,1mm - Bolt size M12x1,25 - Nissan/Subaru H&R TRAK+ Wheels Spacers improve the look as well as the handling of your car with wheel spacers. TRAK+TM wheel spacers are compatible with both the stock and aftermarket wheels. Product benefits: High strength, lightweight aluminum/magnesium alloy Precision CNC machined Hard anodized for greater surface hardness and corrosion resistance Fit either stock or aftermarket wheels Compatible with OEM and aftermarket suspension systems Available for a wide range of automobiles Delivered with approval The ABE sets include mounting material and wheel locks Produced in Germany The fitting of the DRS-System requires the exchange in the wheel flanges or the brake drums, of the existing knurl bolts with the appropriate longer H&R knurl bolts. The longer H&R knurl bolts are supplied. The wheels should then be fitted using the existing wheel nuts provided with the wheels. All fixing-accessories are included!
H&R Wheel Spacers 5mm 4x100 - Hub 60,1mm - Bolt size M12x1,5 - Dacia/Nissan/Renault/Smart
H&R DR-System Wheel spacers:- 5mm per spacer - 10mm per axle - Bolt pattern 4x100 - Hub 60,1mm - Bolt size M12x1,5 - Dacia/Nissan/Renault/Smart H&R TRAK+ Wheels Spacers improve the look as well as the handling of your car with wheel spacers. TRAK+TM wheel spacers are compatible with both the stock and aftermarket wheels. Product benefits: High strength, lightweight aluminum/magnesium alloy Precision CNC machined Hard anodized for greater surface hardness and corrosion resistance Fit either stock or aftermarket wheels Compatible with OEM and aftermarket suspension systems Available for a wide range of automobiles Delivered with approval The ABE sets include mounting material and wheel locks Produced in Germany The wheel spacer should be fitted between the wheel and the axial hub using longer wheel bolts (please order separately). When ordering the longer bolts please state which cone type you require and the required extra length. All screws for the DR Systems have to be ordered separately. Bolt size M12x1,25: Nissan Micra K12 Not applicable with steel rims: Renault Clio D (IV) Type R Smart fortwo/forfour Type 451 (453)
H&R Wheel Spacers 5mm 4x100/108 - Hub 57,1mm - Bolt size M12x1,5 - Audi/BMW/Seat/Skoda/Volkswagen
H&R DR-System Wheel spacers:- 5mm per spacer - 10mm per axle - Bolt pattern 4x100/108 - Hub 57,1mm - Bolt size M12x1,5 - Audi/BMW/Seat/Skoda/Volkswagen H&R TRAK+ Wheels Spacers improve the look as well as the handling of your car with wheel spacers. TRAK+TM wheel spacers are compatible with both the stock and aftermarket wheels. Product benefits: High strength, lightweight aluminum/magnesium alloy Precision CNC machined Hard anodized for greater surface hardness and corrosion resistance Fit either stock or aftermarket wheels Compatible with OEM and aftermarket suspension systems Available for a wide range of automobiles Delivered with approval The ABE sets include mounting material and wheel locks Produced in Germany The wheel spacer should be fitted between the wheel and the axial hub using longer bolt snot supplied (please order separately). When ordering the longer bolts please state which cone type you require and the required extra length. All screws for the DR Systems have to be ordered separately. Bolt size M14x1,5: Audi Type 89/B4/B4Q Audi 80 Type 89 (Q)/B4 (Q)/100/200 Type 44/44Q
H&R Wheel Spacers 8mm 4x100 - Hub 57,1mm - Bolt size M12x1,5 - Volkswagen/Seat
H&R DR-System Wheel spacers:- 8mm per spacer - 16mm per axle - Bolt pattern 4x100 - Hub 57,1mm - Bolt size M12x1,5 - Volkswagen/Seat H&R TRAK+ Wheels Spacers improve the look as well as the handling of your car with wheel spacers. TRAK+TM wheel spacers are compatible with both the stock and aftermarket wheels. Product benefits: High strength, lightweight aluminum/magnesium alloy Precision CNC machined Hard anodized for greater surface hardness and corrosion resistance Fit either stock or aftermarket wheels Compatible with OEM and aftermarket suspension systems Available for a wide range of automobiles Delivered with approval The ABE sets include mounting material and wheel locks Produced in Germany The wheel spacer should be fitted between the wheel and the axial hub using longer bolt snot supplied (please order separately). When ordering the longer bolts please state which cone type you require and the required extra length. All screws for the DR Systems have to be ordered separately.